Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Systems of Classification

Provide appropriate redundancy for risk classification of system... [Pg.117]

Table 2.3. Classification of systems of parameters and time-dependent variables. reactor equations with a set of... Table 2.3. Classification of systems of parameters and time-dependent variables. reactor equations with a set of...
This section is concerned with calorimetry to determine the classification of the reacting system (as described in Chapter 4) so that appropriate relief sizing methods can be used. The measurement of data for relief sizing is described in A2.4 to A2.6 below, depending on the results of the classification of system type for relief sizing. [Pg.130]

All of these classifications are naturally interrelated for a given chemical/biological engineering problem, and the best approach is to choose one main classification and then use the other problem s classifications as subdivisions. The most fundamental classification of systems is usually based upon their thermodynamical characteristics. This classification is the most general it divides systems into open, closed, and isolated systems which are defined as follows ... [Pg.60]

DNA and serum complement (C3) levels. Application to diagnosis and classification of systemic lupus erythematosus. Am. J. Med. 74, 206-216 (1983). [Pg.172]

The above has been an attempt, obviously subjective, to identify a chronological pattern to the subject under review. In the following discussion, less emphasis will be placed on the sequence of events than on classification of systems and the problems of interpretation. [Pg.210]

II, Chapters 4, 5, and 6 give all the information regarding the theoretical aspects involved in designing a complete NMMS and ensuring its successful implementation and maintenance. A complete system to detect, describe, analyse and follow-up near misses is outlined (Chapter 4), with special emphasis on a model-based classification of system failure (Chapter 5) a number of key issues relating to organisational aspects like acceptance by employees, and safety cultures are discussed in Chapter 6,... [Pg.5]

TABLE 85—1. Revised Criteria for Classification of Systemic Lupus Erythematosus ... [Pg.1582]

From Tan EM, Cohen AS, Fries JF, et al. The 1982 revised criteria for the classification of systemic lupus erythematosus. Arthritis Rheum 1982 25 1274 and Fiochberg MC. Updating the American College of Rheumatology Revised Criteria for the Classification of Systemic Lupus Erythematosus, Arthritis Rheum 1997 40 1725, with permission. [Pg.1582]

Tan EM, Cohen AS, Fries JF, et al. The 1982 revised criteria for the classification of systemic lupus erythematosus. Arthritis Rheum 1982 25 1271-1277. [Pg.1595]

For the discussion of the equilibria occurring in two-component systems, the following classification of systems, which also gives the order in which they will be discussed, has been adopted —... [Pg.70]

Phases. Components. Degrees of Freedom. Variability of a System. The Phase Rule. Classification of Systems according to the Phase Rule. Deduction of the Phase Rule. [Pg.335]

Another classification of systems which is very important for deciding the algorithm for model solution, is that of linear and non-linear systems. The equations of linear systems can usually be solved analytically, while the equations of non-linear systems are almost always solved numerically. In this respect, it is important to recognize the important fact that physical systems are almost always non-linear and linear systems are either an approximation that should be justified, or the equations are intentionally linearized in the neighbourhood of a certain state of the system and are strictly valid only in this neighbourhood. [Pg.18]

Chapter 1 introduces the reader to system theory and the classification of systems. It also covers the main principles for the development of mathematical models in general and for fixed bed catalytic reactors in particular. [Pg.267]

Several ways of classification of systems are possible. One classification refers to the way how energy forms can be exchanged and another more recent classification... [Pg.72]

Because the HTR-10 test reactor is designed on the inherent safety philosophy, safety classifications of systems and components departure from the way it is done for water cooled power reactors For example, primary pressure boundary is defined to the first isolation valve Steam generator tubes are classified as Class II component Diesel generators are not required to be as highly qualified as those used for large water cooled power reactors, since no systems or components with large power demand would require an immediate start of the diesel engines at a plant black-out accident... [Pg.161]

A general agreement exists that classification of systems, structures and components of a plant from the point of view of safety and from the point of view of resistance to external actions (earthquake, and so on) is necessary to make decisions on the following ... [Pg.117]

General requirements 2 CLASSIFICATION OF SYSTEMS AND OF COMPONENTS (4 SAFETY... [Pg.301]

Classification of systems on the basis of the importance of the affected safety... [Pg.12]

Markowitz SS, McDonald CJ, Fethiere W (1972) Occupational acroosteolysis. Arch Dermatol 106 219-233 Masi AT (1980) Preliminary criteria for the classification of systemic sclerosis. Arthritis Rheum 23 581-590 Medsger TA, Masi AT (1971) Epidemiology of systemic sclerosis. Ann Intern Med 74 714-721... [Pg.312]

Taxonomy is a systematic representation of a system s existence (McKelvey 1982). Accordingly, taxonomy is built based on principles of system theory. It is a mechanism for structuring the knowledge about a certain system domain. The process of taxonomy development consists of information collection, systematic analysis, and classification of system attributes. [Pg.119]


See other pages where Systems of Classification is mentioned: [Pg.113]    [Pg.236]    [Pg.933]    [Pg.181]    [Pg.14]    [Pg.23]    [Pg.2]    [Pg.159]    [Pg.170]    [Pg.28]    [Pg.46]    [Pg.201]    [Pg.239]    [Pg.2]    [Pg.1595]    [Pg.11]    [Pg.117]    [Pg.119]    [Pg.10]    [Pg.157]    [Pg.115]    [Pg.572]   
See also in sourсe #XX -- [ Pg.12 , Pg.70 ]




SEARCH



Attributes of a Waste Classification System

Classification of Chemical and Biological Engineering Systems

Classification of FI Gas-liquid Separation Systems

Classification of Linear Systems

Classification of Lithium Alloy Systems

Classification of Objects in the Solar System

Classification of catastrophes in dynamical systems

Classification of chromatographic systems

Classification of colloidal systems

Classification of system type for relief sizing

Classification system

Classifications of internal repair systems for steel pipelines

Comparison of Classification Systems for Radioactive and Hazardous Chemical Wastes

Comparison of the United States and IAEA Radioactive Waste Classification Systems

Eindhoven classification model of system failure

Globally Harmonized System of Classification

Globally Harmonized System of Classification and Labelling

HRAC Classification System of Herbicides

Library of Congress Classification system

Physical classification of reaction systems

Shortcomings of Current Waste Classification Systems

Solvability and Classification of Variables II Nonlinear Systems

Summary of Existing Waste Classification Systems

Use of Nonactive Pharmaceutical Excipients in Oral Drug Formulations Biopharmaceutical Classification System Considerations

Waiver of In Vivo Bioavailability and Bioequivalence Studies for Immediate-Release Solid Oral Dosage Forms Based on a Biopharmaceutics Classification System

© 2024 chempedia.info