Chemical potential, solvent, stability dispersions

In addition to the molecular weight of the free polymer, there axe other variables, such as the nature of the solvent, particle size, temperature, and thickness of adsorbed layer which have a major influence on the amount of polymer required to cause destabilization in mixtures of sterically stabilized dispersions and free polymer in solution. Using the second-order perturbation theory and a simple model for the pair potential, phase diagrams relat mg the compositions of the disordered (dilute) and ordered (concentrated) phases to the concentration of the free polymer in solution have been presented which can be used for dilute as well as concentrated dispersions. Qualitative arguments show that, if the adsorbed and free polymer are chemically different, it is advisable to have a solvent which is good for the adsorbed polymer but is poor for the free polymer, for increased stability of such dispersions. Larger particles, higher temperatures, thinner steric layers and better solvents for the free polymer are shown to lead to decreased stability, i.e. require smaller amounts of free polymer for the onset of phase separation. These trends are in accordance with the experimental observations. 

Chemical Grafting. Polymer chains which are soluble in the suspending Hquid may be grafted to the particle surface to provide steric stabilization. The most common technique is the reaction of an organic silyl chloride or an organic titanate with surface hydroxyl groups in a nonaqueous solvent. For typical interparticle potentials and a particle diameter of 10 p.m, steric stabilization can be provided by a soluble polymer layer having a thickness of - 10 nm. This can be provided by a polymer tail with a molar mass of 10 kg/mol (25) (see Dispersants). 

---