Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Chemical composition of alloys

UNS. Unified Numbering System satisfies the need for a common designation system for all alloys. The UNS number uniquely identifies the chemical composition of alloys that have been fixed by other organizations, such as one of the metal manufacturers associations. If the alloy is proprietary or produced by a limited number of suppliers, the chemical composition is established by the supplier. The... [Pg.21]

Figure 2-9. UNS designation describes the chemical composition of alloys that may be specified in several systems. Figure 2-9. UNS designation describes the chemical composition of alloys that may be specified in several systems.
CHEMICAL COMPOSITION OF ALLOYS SELECTED FOR TESTING IN PHASE I... [Pg.395]

Table II. Chemical Composition of Alloy 7039, Percent by Weight... Table II. Chemical Composition of Alloy 7039, Percent by Weight...
The tensile strength of a material is a measure of the ability of the material to resist tensile forces exerted on a component made of that material. The strength of steel is dependent on many factors such as the chemical composition of alloying elanents, heat treatment cycles undertaken, forming processes undergone, and so forth. The effect of alloying elements on the mechanical properties of steel shall be discussed in further sections. [Pg.286]

Material Chemical composition of alloy Crystal structure Grain boundary (GB) composition Surface condition... [Pg.91]

Table 1 Chemical compositions of alloys according to German and other standards... Table 1 Chemical compositions of alloys according to German and other standards...
The chemical composition of alloy 29-4C is shown in Table 8.3. This alloy has improved general corrosion resistance to chloride pitting and stress corrosion cracking in some environments. The absence of nickel reduces the cost. [Pg.136]

The chemical composition of alloy S44800 is shown in Table 8.1. Applications are found in chemical processing equipment and the utility industry for use in corrosive environments. [Pg.136]

Alloy 825 is very similar to alloy 800 but the composition has been modified to improve its aqueous corrosion resistance. Refer to Table 11.1 for the chemical composition of alloy 825. [Pg.187]

The chemical composition of alloy 214 will he foimd in Table 15.21. This is a nickel-hased alloy with excellent resistance to 2200 (1204°C). The excellent oxidation resistance is the result of the tenadous aluminum oxide film that protects the metal during prolonged exposiue. [Pg.274]

See other pages where Chemical composition of alloys is mentioned: [Pg.348]    [Pg.348]    [Pg.127]    [Pg.131]    [Pg.136]    [Pg.191]    [Pg.194]    [Pg.195]    [Pg.200]    [Pg.207]    [Pg.208]    [Pg.212]    [Pg.213]    [Pg.215]    [Pg.216]    [Pg.216]    [Pg.250]    [Pg.257]    [Pg.262]    [Pg.264]    [Pg.268]    [Pg.274]    [Pg.275]    [Pg.275]    [Pg.276]    [Pg.185]    [Pg.521]   
See also in sourсe #XX -- [ Pg.395 ]



SEARCH



Alloy chemical composition

Alloy compositions

Composite alloys

Composition of alloys

© 2024 chempedia.info