Chain desorption, adsorbed polymer layers

The whole discussion of polymer adsorption so far makes the fundamental assumption that the layer is at thermodynamic equilibrium. The relaxation times measured experimentally for polymer adsorption are very long and this equilibrium hypothesis is in many cases not satisfied [29]. The most striking example is the study of desorption if an adsorbed polymer layer is placed in contact with pure solvent, even after very long times (days) only a small fraction of the chains desorb (roughly 10%) polymer adsorption is thus mostly irreversible. A kinetic theory of polymer adsorption would thus be necessary. A few attempts have been made in this direction but the existing models remain rather rough [30,31]. 

Steric stabilization is treated by Napper in detail in a textbook (34) and in a more condensed manner in a review article (35). For effective stabilization, the adsorbed polymer chains must be well anchored to the particle surfaces to minimize the risk of desorption, and the adsorbed layer must be reasonably thick to provide sufficient repulsion when the particles approach one another. 

Polymer Adsorption. A review of the theory and measurement of polymer adsorption points out succinctly the distinquishing features of the behavior of macromolecules at solid - liquid interfaces (118). Polymer adsoiption and desorption kinetics are more complex than those of small molecules, mainly because of the lower diffusion rates of polymer chains in solution and the "rearrangement" of adsorbed chains on a solid surface, characterized by slowly formed, multi-point attachments. The latter point is one which is of special interest in protein adsoiption from aqueous solutions. In the case of proteins, initial adsoiption kinetics may be quite rapid. However, the slow rearrangement step may be much more important in terms of the function of the adsorbed layer in natural processes, such as thrombogenesis or biocorrosion / biofouling caused by cell adhesion. 

---