Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Cesium Purex process

Two systems based on crown-calixarenes, able to be used in liquid-liquid extraction process were chosen. Both systems use a modifier in the organic phase to avoid the occurrence of a third phase in the TPH (diluent used at the reprocessing plant of la Hague for the PUREX process) and ensure a sufficient cesium extraction. [Pg.238]

After a few years of storage, the main radioactive heat emitters in HLW are 90Sr and 137Cs. In addition, extremely long-lived actinides—neptunium, plutonium, americium, and curium—should be collected for transmutation in the future. Therefore, different flowsheets can be proposed for waste processing. It is possible to extract each radionuclide in the special extraction (sorption) cycle, for example, uranium and plutonium in the PUREX process, and after that, minor actinides (MAs) by the TRUEX process,4 strontium by the SREX process,5,6 and cesium by sorption7 or extraction.8... [Pg.360]

The flowsheet of the UREX process, developed in the United States, includes the following extraction cycles (1) separation of uranium and technetium, (2) separation of plutonium, (3) separation of cesium and strontium, (4) separation of MAs and Rare Earth Elements (REE), and (5) group separation of MA from REE metals.9,10 Flowsheet development in Europe11 includes a modified PUREX process and, after that, the DIAMEX process for separation of MAs and lanthanides, the SANEX process for separation of MAs from lanthanides, and a special cycle for Am/Cm separation. Cesium and strontium will be in the raffinate of the DIAMEX process, and this raffinate will be vitrified, or cesium can be preliminarily extracted.12... [Pg.360]

As an example, most of the radioactivity from plutonium production is found in the liquid high-level waste from the first cycle of the Purex process. This liquid is neutralized with sodium hydroxide and stored in earth-shielded tanks. There a sludge settles out that contains most of the radioactivity. The residual liquor is partially evaporated to decrease the volume of the waste, and sodium nitrite crystallizes on top of the sludge. In a process to be used at the Savannah River plant, the sodium liquor fraction, containing most of the cesium fission product, is pumped from the tank and precipitated with tetra-phenyl borate. The precipitate will be calcined and packaged for disposal in a high-level repository, and the sodium nitrate crystallized from the residual liquor and sent to a low-level waste repository. [Pg.1261]


See other pages where Cesium Purex process is mentioned: [Pg.100]    [Pg.546]    [Pg.204]    [Pg.215]    [Pg.251]    [Pg.977]    [Pg.456]    [Pg.7185]    [Pg.135]   
See also in sourсe #XX -- [ Pg.940 ]

See also in sourсe #XX -- [ Pg.940 ]

See also in sourсe #XX -- [ Pg.6 , Pg.940 ]




SEARCH



Purex

© 2024 chempedia.info