Cellulose oxidative polymerisation

Dall Acqua et al.45 reported the development of conductive fibres made by cellulose-based fibres embedded with polypyrrole. Several efforts with cotton, viscose, cupro and lyonell have followed. The conductivity is directly related to the amount of polypyrrole, oxidant ratio and fibre structure with significant differences between viscose and lyonell. Polymerisation occurs uniformly inside the fibre bulk, by producing a coherent composite polypyrrole/cellulose. The mechanical and physical properties of cellulose fibres were not significantly modified as they are the best available45. 

Wood pulp is the principal raw material of the lyocell process in terms of cost and volume. The grade used is similar to the dissolving pulp used for viscose rayon but has a slightly lower degree of polymerisation (DP) Tencel fibres have a DP of 500 to 550. The pulp is pulled from the reels into a shredder, which cuts the pulp into small pieces for mixing with the amine oxide solvent. The amount of pulp fed to the mixer has to be accurately measured so that the cellulose content in solution is closely controlled. 

---