Cationic palladium complexes addition

The mechanism for the reaction catalyzed by cationic palladium complexes (Scheme 24) differs from that proposed for early transition metal complexes, as well as from that suggested for the reaction shown in Eq. 17. For this catalyst system, the alkene substrate inserts into a Pd - Si bond a rather than a Pd-H bond [63]. Hydrosilylation of methylpalladium complex 100 then provides methane and palladium silyl species 112 (Scheme 24). Complex 112 coordinates to and inserts into the least substituted olefin regioselectively and irreversibly to provide 113 after coordination of the second alkene. Insertion into the second alkene through a boat-like transition state leads to trans cyclopentane 114, and o-bond metathesis (or oxidative addition/reductive elimination) leads to the observed trans stereochemistry of product 101a with regeneration of 112 [69]. 

Recently, another type of catalytic cycle for the hydrosilylation has been reported, which does not involve the oxidative addition of a hydrosilane to a low-valent metal. Instead, it involves bond metathesis step to release the hydrosilylation product from the catalyst (Scheme 2). In the cycle C, alkylmetal intermediate generated by hydrometallation of alkene undergoes the metathesis with hydrosilane to give the hydrosilylation product and to regenerate the metal hydride. This catalytic cycle is proposed for the reaction catalyzed by lanthanide or a group 3 metal.20 In the hydrosilylation with a trialkylsilane and a cationic palladium complex, the catalytic cycle involves silylmetallation of an alkene and metathesis between the resulting /3-silylalkyl intermediate and hydrosilane (cycle D).21... 

Recently, the oxidative addition of C2-S bond to Pd has been described. Methyl levamisolium triflate reacts with [Pd(dba)2] to give the cationic palladium complex 35 bearing a chiral bidentate imidazolidin-2-ylidene ligand [120]. The oxidative addition of the levamisolium cation to triruthenium or triosmium carbonyl compounds proceeds also readily to yield the carbene complexes [121], The oxidative addition of imidazolium salts is not limited to or d transition metals but has also been observed in main group chemistry. The reaction of a 1,3-dimesitylimidazolium salt with an anionic gallium(I) heterocycle proceeds under formation of the gaUium(III) hydrido complex 36 (Fig. 12) [122]. 

The reductive carbonylation of acetylenes proceeds via a different mechanism compared to the carbonylation of olefins, but through the addition of palladium hydride species to the triple bond. The most probable source of PdH is the WGS reaction, so water is required at two key steps of this catalytic cycle. Depending on conditions, the nature of the catalyst, and promoter additives, the carbonylation of acetylenes can lead to different products. An important role of cationic palladium complexes that readily form in the presence of water has been disclosed. "... 

Copolymerization of isoprene with acrylic monomers is also possible [516,522,523]. The copolymers can be synthesized with statistical as well as strictly alternating structure [524]. Ethylaluminum dichloride is used as a catalyst. The dine units are incorporated predominantly with trans-l,A enchainment. Addition of transition metal compounds or radical-forming compounds increases the polymerization rate [525,526]. Cationic palladium complexes are used as highly active catalysts in the polymerization of isoprene with diethylamine [527]. 

Scheme 7.33 Chiral cationic palladium-complex-catalyzed enantioselective intramolecular addition of arylboronic acids to ketones, as described by Liu and Lu [52].

The ease of formation of the carbene depends on the nucleophilicity of the anion associated with the imidazolium. For example, when Pd(OAc)2 is heated in the presence of [BMIM][Br], the formation of a mixture of Pd imidazolylidene complexes occurs. Palladium complexes have been shown to be active and stable catalysts for Heck and other C-C coupling reactions [34]. The highest activity and stability of palladium is observed in the ionic liquid [BMIM][Brj. Carbene complexes can be formed not only by deprotonation of the imidazolium cation but also by direct oxidative addition to metal(O) (Scheme 5.3-3). These heterocyclic carbene ligands can be functionalized with polar groups in order to increase their affinity for ionic liquids. While their donor properties can be compared to those of donor phosphines, they have the advantage over phosphines of being stable toward oxidation. 

Cationic palladium(II) complexes are homogeneous catalysts for both intramolecular and inter-molecular hydroamination reactions.267 Palladium species immobilized on silica can be prepared by the simple addition of alkyl- or hydroxopalladium(II) complexes to partially dehydroxylated silica. The silica-bound species are more stable than their molecular precursors and are efficient catalysts for the cyclization of aminoalkynes.268... 

It is not clear whether the X anion remains ligated to the palladium(II) center. For example, for acetic acid, the palladium hydride was initially postulated as being HPd(OAc)L ,377,378 but more recently as HPdL +.367 To date, none of these complexes has been characterized.367 Oxidative addition of acetic acid or formic acid to a palladium(O) complex in DMF affords a cationic palladium hydride /ruw.v-I IPd(PPh3)2(DMF)+, with an acetate or a formate counter-anion. Both reactions are reversible and involve an unfavorable equilibrium so that a large excess of acid is required for the quantitative formation of the palladium hydride complex.379 This allows us to conclude that the catalytic reactions initiated by reaction of palladium(O) and acetic acid (or formic acid) proceed via a cationic palladium hydride trans-HPdfPPtHWDMF)"1", when they are performed in DMF.379... 

Rhodium(i) complexes are excellent catalysts for the 1,4-addition of aryl- or 1-alkenylboron, -silicon, and -tin compounds to a,/3-unsaturated carbonyl compounds. In contrast, there are few reports on the palladium(n) complex-catalyzed 1,4-addition to enones126,126a for the easy formation of C-bound enolate, which will result in /3-hydride elimination product of Heck reaction. Previously, Cacchi et al. described the palladium(n)-catalyzed Michael addition of ArHgCl or SnAr4 to enones in acidic water.127 Recently, Miyaura and co-workers reported the 1,4-addition of arylboronic acids and boroxines to a,/3-unsaturated carbonyl compounds. A cationic palladium(n) complex [Pd(dppe)(PhCN)2](SbF6)2 was found to be an excellent catalyst for this reaction (dppe = l,2-bis(diphenyl-phosphine)ethane Scheme 42).128... 

For unsaturated lactones containing an endocyclic double bond also the two previously described mechanisms are presumably involved and the regio-selectivity of the cyclocarbonylation is governed by the presence of bulky substituents on the substrate. Inoue and his group have observed that the catalyst precursor needs to be the cationic complex [Pd(PhCN)2(dppb)]+ and not a neutral Pd(0) or Pd(II) complex [ 148,149]. It is suggested that the mechanism involves a cationic palladium-hydride that coordinates to the triple bond then a hydride transfer occurs through a czs-addition. Alper et al. have shown that addition of dihydrogen to the palladium(O) precursor Pd2(dba)3/dppb affords an active system, in our opinion a palladium-hydride species, that coordinates the alkyne [150]. 

The discovery in the early 1980s that cationic palladium-phosphine complexes catalyse the copolymerisation of carbon monoxide with ethene or a higher a-olcfin to yield perfectly alternating polyketones has since attracted continuous increasing interest [1,2]. This is because the monomers are produced in large amounts at a low cost and because polyketones represent a new class of thermoplastics of physical-mechanical and chemical properties that have wide applications [3-6]. In addition, easy functionalisation can open the way to a large number of new materials [7]. The copolymerisation has... 

Highly branched ethene-methyl acrylate polymers. The cationic palladium diimine complexes are remarkably tolerant towards functional groups, although the rates decrease somewhat when polar molecules are added. In ETM catalysis addition of polar molecules or monomers kills the catalyst and therefore it was very interesting to see what the new palladium catalysts would do in the presence of polar monomers. Indeed, using methyl acrylate a copolymerisation... 

Often Lewis acids are added to the system as a cocatalyst. It could be envisaged that Lewis acids enhance the cationic nature of the nickel species and increase the rate of reductive elimination. Indeed, the Lewis acidity mainly determines the activity of the catalyst. It may influence the regioselectivity of the catalyst in such a way as to give more linear product, but this seems not to be the case. Lewis acids are particularly important in the addition of the second molecule of HCN to molecules 2 and 4. Stoichiometrically, Lewis acids (boron compounds, triethyl aluminium) accelerate reductive elimination of RCN (R=CH2Si(CH3)3) from palladium complexes P2Pd(R)(CN) (P2= e g. dppp) [7], This may involve complexation of the Lewis acid to the cyanide anion, thus decreasing the electron density at the metal and accelerating the reductive elimination. 

A a-5-bonded r-alkene (r] ) intermediate (325) has been invoked to account for the hydrogenation of the thiaplatinacycle (324) to the complex (326) in which two hydrogens have been added and a hydrogen shift has occurred." When coordinated to neutral and cationic palladium(II) and platinum(II) centres, the diphosphine 2,3-bis(diphenylphosphino)propene, on treatment with benzylamine, was found to undergo isomerization to coordinated c/i-l,2-bis(diphenylphosphino)propene rather than the expected nucleophilic addition to the double bond. 

In accord with calculations performed by Cavell et al. [110], the oxidative addition of C2-X functionalized azolium cations (X = halogen) to metal centers proceeds faster and with a more favorable reaction enthalpy than the oxidative addition of the C2-H substimted imidazolium cations [118, 119]. The former reaction was applied successfully for the preparation of nickel and palladium complexes bearing a variety of different ylidene ligands [119]. 

It is reasonable to assume that the identical complex will be generated whether it be done stoichiometrically from an alkene, to give a chloride or carboxylate dimer followed by the addition of 2 equiv. of a phosphine per Pd, or by the addition of an allyl-X compound to give a phosphine-Pd0 complex. This assumption is supported by the fact that complexes generated in either manner have been found to exhibit identical reaction profiles.380 Furthermore, for the vast majority of allylpalladium reactions studied, it is most likely that the reactive species is a cationic bisphosphine-palladium complex (13).13 Calculations... 

---