Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Castings design specifications

Style AC cast elevator buckets are designed specifically to increase elevator capacity by closer bucket spacing. Style AC buckets are used for handling material snch as raw meal, crushed clinker, and finished cement. Air ports are provided in the bottom of the bucket to act as a relief valve for faster loading and unloading of light, fluffy materials. [Pg.296]

In addition to the UNS designations previously described, there is also a series of UNS designations specifically for cast materials. Table 14.3 lists several alloys giving both ACI and UNS designations. [Pg.223]

Temper Designations of Magnesium Alloys, Cast and Wrought," specification no. ANSI/ASTM B296-67, ki Ref. 76. [Pg.336]

Other members of the medium-alloy group do not have ACI designations but are listed in ASTM specifications (refer to ASTM A 494) such as Incoloy 825 and Hastelloy G-3 and G-30. Several nickel-based alloys that are normally only wrought have cast equivalents but are not listed in any specifications. Hastelloy G-3 contains 44 percent... [Pg.35]

ISO 7823-3 2003 Plastics - Poly(methyl methacrylate) sheets - Types, dimensions and characteristics - Part 3 Continuous cast sheets ISO 8257-1 1998 Plastics - Poly(methyl methacrylate) (PMMA) moulding and extrusion materials - Part 1 Designation system and basis for specifications ISO 8257-2 2001 Plastics - Poly(methyl methacrylate) (PMMA) moulding and extrusion materials - Part 2 Preparation of test specimens and determination of properties ISO 12017 1995 Plastics - Poly(methyl methacrylate) double- and triple-skin sheets - Test methods... [Pg.435]

Certified test curves and data (see example in Annex M) shall be submitted within 15 days after testing and shall include head, power recalculated to the proper specific gravity, and efficiency, plotted against flowrate. If applicable, viscosity corrections shall be indicated. The water NPSHR curve shall be included, drawn from actual test data, for an impeller cast from the same pattern. The curve sheet shall include the maximum and minimum diameters of the impeller design supplied, the identification number of the impeller or impellers, and the pump serial number. [Pg.103]

See other pages where Castings design specifications is mentioned: [Pg.57]    [Pg.27]    [Pg.212]    [Pg.105]    [Pg.698]    [Pg.563]    [Pg.70]    [Pg.368]    [Pg.315]    [Pg.324]    [Pg.290]    [Pg.461]    [Pg.381]    [Pg.210]    [Pg.471]    [Pg.487]    [Pg.1088]    [Pg.134]    [Pg.898]    [Pg.647]    [Pg.562]    [Pg.359]    [Pg.207]    [Pg.236]    [Pg.56]    [Pg.34]    [Pg.355]    [Pg.393]    [Pg.263]    [Pg.275]    [Pg.267]    [Pg.134]    [Pg.110]    [Pg.41]    [Pg.96]    [Pg.260]    [Pg.461]    [Pg.81]    [Pg.326]    [Pg.368]    [Pg.261]    [Pg.155]    [Pg.91]    [Pg.61]   
See also in sourсe #XX -- [ Pg.515 ]



SEARCH



Specific designs

© 2024 chempedia.info