Bromide gravimetric analysis

The precipitation of chloride and, if present, dissolved bromide and iodide as the total of dissolved halide ions by silver salts as low-solubility silver halides is also not only used for concentrating traces of bromide and iodide for example, but also for gravimetric analysis, as a method of calibration. Bromide and iodide should then be determined separately (Section 3.2) and subtracted from the total of the precipitated halides. Reliable results are then obtained even at high concentrations. 

Fluoride ion, and weak acids and bases do not interfere, but nitrate, nitrite, perchlorate, thiocyanate, chromate, chlorate, iodide, and bromide do. Since analysis of almost all boron-containing compounds requires a preliminary treatment which ultimately results in an aqueous boric acid sample, this procedure may be regarded as a gravimetric determination of boron. 

Gravimetric and volumetric methods are practicable for the quantitative determination of the a-sulfo fatty acid esters. Using gravimetric methods the surfactant is precipitated with p-toluidine or barium chloride [105]. The volumetric determination method is two-phase titration. In this technique different titrants and indicators are used. For the analysis of a-sulfo fatty acid esters the quaternary ammonium surfactant hyamine 1622 (p,f-octylphenoxyethyldimethyl-ammonium chloride) is used as the titrant [106]. The indicator depends on the pH value of the titration solution. Titration with a phenol red indicator is carried out at a pH of 9, methylene blue is used in acid medium [106], and a mixed indicator of a cationic (dimidium bromide) and an anionic (disulfine blue VN150) dye can be used in an acid and basic medium [105]. 

---