Boron atomic structure

As an example, these rules can be applied to boron hydrides derived from the pentagonal bipyramid (Fig. 3). With no boron atoms missing from the deltahedron there would be seven boron atoms and the formula would be. If the boron atom depicted at the bottom of the pentagonal bipyramid is removed, the boron atom structure is a pentagonal pyramid, and the chemical formula would be B6Hio. If one boron atom is removed from the base... 

TABLE II Calculated Numbers of Electrons Needed to be Supplied by Hydrogen Atoms or Negative Charges for Different Geometries of the Boron Atom Structure Described as Poiyhedra with Vertices Removed... 

Aluminium tetrahydridoborate is a volatile liquid. It is the most volatile aluminium compound known. It is covalent and does not contain ions but has a hydrogen-bridge structure like that of diborane, i.e. each boron atom is attached to the aluminium by two hydrogen bridges ... 

Another type of anion, confined for practical purposes to boron compounds, has no unshared electrons at the anionic site, and must be thought of as being formed by addition of hydride to a boron atom (or other atom with an incomplete valence shell). Such structures were not anticipated at the time general heterocyclic nomenclature was developed, and they are only recently being fitted into systematic nomenclature (lUPAC Provisional Recommendation 83.2). Proposals for a suffix to indicate such structures are under consideration (1982). 

Figure 6.1 The icosahedron and some of its symmetry elements, (a) An icosahedron has 12 vertices and 20 triangular faces defined by 30 edges, (b) The preferred pentagonal pyramidal coordination polyhedron for 6-coordinate boron in icosahedral structures as it is not possible to generate an infinite three-dimensional lattice on the basis of fivefold symmetry, various distortions, translations and voids occur in the actual crystal structures, (c) The distortion angle 0, which varies from 0° to 25°, for various boron atoms in crystalline boron and metal borides.

Figure 6.6 Idealized patterns of boron catenation in metal-rich borides. Examples of the structures (a)-(f) are given in the text. Boron atoms are often surrounded by trigonal prisms of M atoms as shown in Fig. 6.7.

The radius of the 24-coordinate metal site in MBs is too large (215-225 pm) to be comfortably occupied by the later (smaller) lanthanide elements Ho, Er, Tm and Lu, and these form MB4 instead, where the metal site has a radius of 185-200 pm. The structure of MB4 (also formed by Ca, Y, Mo and W) consists of a tetragonal lattice formed by chains of Bs octahedra linked along the c-axis and joined laterally by pairs of B2 atoms in the xy plane so as to form a 3D skeleton with tunnels along the c-axis that are filled by metal atoms (Fig. 6.11). The pairs of boron atoms are thus surrounded by trigonal prisms of... 

A simplified MO approach to the bonding in do50-B6H6 (structure I, p. 153) is shown in the Panel. It is a general feature of anions that there are no B-H-B or BH2 groups and the 4n boron atomic orbitals are always... 

Look closely at the acid-base reaction in Figure 2.5, and note how it is shown. Dimethyl ether, the Lewis base, donates an electron pair to a vacant valence orbital of the boron atom in BF3, a Lewis acid. The direction of electron-pair flow from the base to acid is shown using curved arrows, just as the direction of electron flow in going from one resonance structure to another was shown using curved arrows in Section 2.5. A cuived arrow always means that a pair of electrons moves from the atom at the tail of the arrow to the atom at the head of the arrow. We ll use this curved-arrow notation throughout the remainder of this text to indicate electron flow during reactions. 

Two electron pairs are as far apart as possible when they are directed at 180° to one another. This gives BeF2 a linear structure. The three electron pairs around the boron atom in BF3 are directed toward the comers of an equilateral triangle the bond angles are 120°. We describe this geometry as trigonal planar. 

MP2, MAs2 and MSb2 all have a compressed form of the marcasite structure, while the carbides MC have trigonal prismatic coordination in the WC structure. Several borides are known MB2 has nets of boron atoms. RunBg has branched chains while RU7B3 has isolated borons. 

The structurally simplest silicon reagent that has been used to reduce sulphoxides is the carbene analog, dimethylsilylene (Me2Si )29. This molecule was used as a mechanistic probe and did not appear to be useful synthetically. Other silanes that have been used to reduce sulphoxides include iodotrimethylsilane, which is selective but unstable, and chlorotrimethylsilane in the presence of sodium iodide, which is easy to use, but is unselective since it cleaves esters, lactones and ethers it also converts alcohols into iodides. To circumvent these complications, Olah30 has developed the use of methyltrichlorosilane, again in the presence of sodium iodide, in dry acetonitrile (equation 8). A standard range of sulphoxides was reduced under mild conditions, with yields between 80 and 95% and with a simple workup process. The mechanism for the reaction is probably very similar to that given in equation (6), if the tricoordinate boron atoms in this reaction scheme are replaced... 

Boron implant with laser anneal. Boron atoms are accelerated into the backside of the CCD, replacing about 1 of 10,000 silicon atoms with a boron atom. The boron atoms create a net negative charge that push photoelectrons to the front surface. However, the boron implant creates defects in the lattice structure, so a laser is used to melt a thin layer (100 nm) of the silicon. As the silicon resolidihes, the crystal structure returns with some boron atoms in place of silicon atoms. This works well, except for blue/UV photons whose penetration depth is shorter than the depth of the boron implant. Variations in implant depth cause spatial QE variations, which can be seen in narrow bandpass, blue/UV, flat fields. This process is used by E2V, MIT/LL and Samoff. 

Borasiloxanes are derivatives of the well-studied class of siloxanes (R2SiO) , in which part of the four-coordinate silicon atoms have been substituted by three-coordinate boron atoms. They are therefore characterized by the presence of Si-O-B units and can have one-dimensional oligomeric [120] or polymeric [121], two-dimensional cyclic [122-126], or three-dimensional cagelike [127-131] structures 83-92 as outlined in Figs. 23 and 24. 

In compound 91 the diborahexasiloxane ring system 89 can be identified, which has been expanded to a three-dimensional structure by an additional (R2Si0)20 fragment bridging now, in contrast to compound 90, two boron atoms [127], This cage can be obtained in yields of 45% from tetraphenyldisiloxanediol and boric acid when reacted in a 6 1 stoichiometry. The molecule contains a... 

In 159 and 163-166 the tertiary amine function is coordinated to the boron atom and transmits the electronic change due to the ester formation to the chromophore. In 160-162 the boron atom is directly connected to the chromophore. After the complexation of the saccharide, the change of the charge transfer, e.g., for 159 [249-251], or the fluorescence bands, e.g., for 160-166 [252-255], can be measured and interpreted. The most selective binding of n-glucose has been achieved with host 164 that forms a 1 1 complex with a macrocyclic structure (Scheme 1). 

Metal Boride Structures (Isolated Boron Atoms). 

---