Boiling point minimum

Lowly compatible behavior by the components in the liquid state with weaker particle interactions leads to a positive deviation from Raoult s law. Correspondingly, one can observe a vapor pressure maximum (Fig. 14.22a) as well as a boiling point minimum (Fig. 14.22b). Acetone/carbon disulfide and ethanol/water are examples of positive azeotropes (minimum-boiling or maximum-pressure azeotropes). 

Azeotropes are of great importance to distillation and rectification. At the azeotrope gas and liquid have the same concentration y = x) and, in turn, no driving force for interfacial mass transfer exists. Azeotropic mixtures behave in some respects like pure substances. They cannot be fractionated by simple distillation. Azeotropes can exhibit a boiling point minimum (minimum azeotropes) or a boiling point maximum (maximum azeotropes). In multicomponent mixtures saddle point azeotropes with intermediate boiling temperature can also exist. 

Boiling Range, 760 millimeters, C Initial boiling point, minimum 217.0... 

Many liquid mixtures exhibit a minimum boiling point (e.g. methanol and chloroform -propanol and water) whilst others show a... 

Examples of azeotropic mixtures of minimum boiling point are collected in Table I, 4, A. 

Examples of azeotropic mixtures of maximum boiling point are tabulated below these are not as numerous as those of minimum boiling point. 

The maintenance of a constant pressure in a system during distillation under diminished pressure is of great practical importance if trustworthy boiling points are desired. Devices which maintain a constant pressure in a system that is higher than the minimum pressure that the pump will give are termed manostats. A simple manostat, due to M. S. Newman, is illustrated in Fig. II, 23, 4. 

McCabe-Thie/e Example. Assume a binary system E—H that has ideal vapor—Hquid equiHbria and a relative volatiHty of 2.0. The feed is 100 mol of = 0.6 the required distillate is x = 0.95, and the bottoms x = 0.05, with the compositions identified and the lighter component E. The feed is at the boiling point. To calculate the minimum reflux ratio, the minimum number of theoretical stages, the operating reflux ratio, and the number of theoretical stages, assume the operating reflux ratio is 1.5 times the minimum reflux ratio and there is no subcooling of the reflux stream, then ... 

FIG. 13-11 liquid boiling points and vapor oondensation temperatures for minimum-boiling azeotrope mixtures of ethyl aeetate and ethanol at 101.3 kPa (1 atm) total pressure. 

Examples where the boiling point of the distillate is a minimum (less than either pure component) include ... 

An important system in distillation is an azeotropic mixture. An azeotrope is a liquid mixture which when vaporized, produces the same composition as the liquid. The VLE plots illustrated in Figure 11 show two different azeotropic systems one with a minimum boiling point and one with a maximum boiling point. In both plots, the equilibrium curves cross the diagonal lines. 

They are widely employed in the manufacture, storage and distribution of liquified gases, particularly on sea and road tankers. The most popular alloy for cryogenic applications is 4.5% magnesium alloy (N8). Table 3.33 gives the boiling points of the most common cryogenic liquids and the minimum temperatures at which various materials can be used. 

Cyrogenic Liquid Boiling Point (°C) Material Minimum Temperature of Use (°C)... 

---