Bismuth molybdate catalyst with scheelite structure

Multicomponent Bismuth Molybdate Catalysts with Scheelite Structure... 

One typical way to improve the catalyst system was directed at the multi-component bismuth molybdate catalyst having scheelite structure (85), where metal cations other than molybdenum and bismuth usually have ionic radii larger than 0.9 A. It is important that the a-phase of bismuth molybdate has a distorted scheelite structure. Thus, metal molybdates of third and fourth metal elements having scheelite structure easily form mixed-metal scheelite crystals or solid solution with the a-phase of bismuth molybdates. Thus, the catalyst structure of the scheelite-type multicomponent bismuth molybdate is rather simple and composed of a single phase or double phases including many lattice vacancies. On the other hand, another type of multi-component bismuth molybdate is composed mainly of the metal cation additives having ionic radii smaller than 0.8 A. Different from the scheelite-type multicomponent bismuth molybdates, the latter catalyst system is never composed of a simple phase but is made up of many kinds of different crys-... 

Investigations into the scheelite-type catalyst gave much valuable information on the reaction mechanisms of the allylic oxidations of olefin and catalyst design. However, in spite of their high specific activity and selectivity, catalyst systems with scheelite structure have disappeared from the commercial plants for the oxidation and ammoxidation of propylene. This may be attributable to their moderate catalytic activity owing to lower specific surface area compared to the multicomponent bismuth molybdate catalyst having multiphase structure. 

Bismuth molybdate catalysts activated by the metal cations with ionic radii smaller than 0.8 A (Ni2+, Co2+, Fe2+, Mg2+, and/or Mn2+ with Fe3+) are never composed of a single phase, such as scheelite structure, and many kinds of metal molybdate, including various phases of bismuth molybdate,... 

Improved catalytic performance, selectivity and resistance to fusion, over bismuth molybdate catalysts was reported by McClellan (90) for catalysts obtained by chemically combining bismuth, molybdenum, phosphorus, and silica. After calcination at 450°C, the bismuth phosphomolybdate-on-silica catalyst showed an X-ray pattern of mainly crystalline Bi2(Mo04)3 which subsequently was converted to a new, substantially amorphous, phase after calcination at 800°C. Substantially morphous meant that the X-ray diffraction lines were broad diffuse bands of low intensity. The pattern of lines for this novel phase indicated a scheelite structure. A special interaction of silica with bismuth molybdate was also suggested by Callahan et al. (91). 

---