Bioreactors—Hardware Configuration

Air Driven Bioreactors. The simplest design is the air-driven bioreactor equipped with sparger at the bottom of the vessel. It is widely used for plant cell, tissue, and organ cultures. In cases where the cells grow rapidly and the cell mass occupies 40-60% of the reactor volume, the flow characteristics become non-Newtonian and the culture medium can no longer be agitated by simple aeration. 

Gaseous Phase Bioreactor. As shown in Fig. 24, this type of bioreactor is equipped with filters on which the culture is supported and with a shower nozzle for spraying on the medium (Ushiyama et al., 1984 ti l Ushiyama, 1988).1 1 Seed cultures are inoculated on the filters and the medium is supplied to the culture by spraying from a shower nozzle. The drained medium is collected on the bottom of the bioreactor. This type of bioreactor is excellent for plant cell, tissue, and organ cultures because there is no mechanical agitation (e.g., driven impeller, aerator) and, therefore, the growth rate and the secondary metabolite production are enhanced. 

Light Introducing Bioreactor. Plants are susceptible to light irradiation and as a consequence various metabolic and/or physiological changes are generated. Some important reactions are (i) photosynthesis, 

Gas Permeable Membrane Aerator Bioreactor. This type of bioreactor has not yet been fully developed. Nevertheless, some information is available. For example, one bioreactor is equipped with an aerator composed of fine tubes made of polycarbonate, polypropylene, silicone gum, etc. This type of bioreactor should be valuable for immobilized plant cell cultures. 

---