Beaded activated carbon

The commercialization by Kureha Chemical Co. of Japan of a new, highly attrition-resistant, activated-carbon adsorbent as Beaded Activated Carbon (BAC) allowed development of a process employing fluidized-bed adsorption and moving-bed desorption for removal of volatile organic carbon compounds from air. The process has been marketed as GASTAK in Japan and as PURASIV HR (91) in the United States, and is now marketed as SOLD ACS by Daikin Industries, Ltd. 

PuraSiv HR A process for removing solvent vapors from air by adsorption on beaded activated carbon contained in a combined fluidized moving bed. For water-soluble solvents, the gas used for desorption is nitrogen and the process is known as PuraSiv HR, Type N (not to be confused with PuraSiv N) for chlorinated hydrocarbons, steam stripping is used and the process is known as PuraSiv HR, Type S. Developed by Kureha Chemical Company and now marketed by the Union Carbide Corporation. The process was originally known as GASTAK because it was developed by the Taiyo Kaken Company, subsequently acquired by Kureha Chemical Company. It is also marketed by Daikin Industries under the name Soldacs. 

Fixed-bed, temperature-swing processes rarely turn onl to be economical for bulk separations. Moving-bed and fluidized-bed processes based on thermal regeneration may prove to be much more economical because of lower heal requirements per unit of feed. The key to the success of these processes lies in the development of highly attrition-resistant adsorbent particles such as Kureha s bead activated carbon.2... 

The commercial sample, spherical bead activated carbon, was supplied by Kureha Chemical Industry. This activated carbon is referred to as Kureha carbon, which has a total micropore volume of 0.56 cm g" and a BET surface area of 1300 m g . The detailed textural properties of Kureha carbon are reported elsewhere [9]. The pore size distribution was evaluated in terms of the simulation of the density hmctional theory (DFT) using the isotherm data of nitrogen adsorption at 77 K and relative pressures up to 0.2. Only micropores contribute to the total pore volume and surface area. This was further confirmed by mercury intrusion porosimetry, no significantly additional porosity was observed in the pore size range from 2 nm to 100 pm. So, the investigated adsorbent is a purely microporous material and its pore size distribution covers the range from 0.4 to 1.9 nm [9]. 

---