Austenitic stainless steels passivity nitrogen

Stainless steel 316L material used for piping and equipment shows considerable corrosion resistance because of the beneficial effect of molybdenum on the surface properties. It is also observed that the surface treatment (pre-reduced, polished, passivated and chemically treated surfaces) of stainless steel equipment and piping reduces the corrosion process in seawater applications. The corrosion resistance of stainless steel in seawater applications can also be enhanced by bulk alloying the stainless steel with nitrogen, chromium, molybdenum and nickel by converting the stainless steel into super austenitic stainless steel. From leaching studies it is also observed that the release of iron, chromium and nickel from the super austenitic stainless steel to seawater is considerably... 

A modification of the chemical composition of the passive films. The composition of the passive films formed on nitrogen-bearing austenitic stainless steels has been analyzed by Auger and ESCA (Clayton and Olefjord, 1995, and references therein, Sadough Vanini et al.. 

The passive film formed on austenitic stainless steel is duplex in nature, consisting of an inner barrier oxide film and an outer deposit of hydroxide or salt film. Passivation takes place by the rapid formation of surface-absorbed hydrated complexes of metals that are sufficiently stable on the alloy surface that further reaction with water enables the formation of a hydroxide phase that rapidly deprotonates to form an insoluble surface oxide film. The three most commonly used austenite stabilizers—nickel, manganese, and nitrogen—all contribute to the passivity. Chromium, a major alloying ingredient, is in itself very corrosion resistant and is foimd in greater abundance in the passive film than iron, which is the major element in the alloy. 

ROLES OF NITROGEN IN THE PASSIVITY OF AUSTENITIC STAINLESS STEEL... 

Roles of Nitrogen in the Passivity of Austenitic Stainless Steel... 

A schematic summary of the alloying metals that affect the anodic polarization curve of stainless steel is shown in Fig. 4.16. The addition of 8% nickel to an alloy containing 18% chromium forms austenitic structure SS Type 304. The addition of Mn and N increases the stability of austenitic steel. The chromium content of stainless steel affects the anodic polarization curves as shown in Fig. 4.16. Nickel promotes repassivation in a corrosive environment, but concentrations higher than 30% reduces the passivation current, the critical current density, and increases the critical pitting potential. Nitrogen... 

---