Anodes Suitable for Soil

The anodes most suitable for burying in soil are cylindrical anodes of high-silicon iron of 1 to 80 kg and with diameters from 30 to 110 mm and lengths from 250 to 1500 mm. The anodes are slightly conical and have at the thicker end for the current lead an iron connector cast into the anode material, to which the cable connection is joined by brazing or wedging. This anode connection is usually sealed with cast resin and forms the anode head (see Fig. 7-2). Ninety percent of premature anode failures occur at the anode head, i.e., at the cable connection to the anode [29], Since installation and assembly costs are the main components of the total cost of an 

In addition to anodes with a simple connecting head, there are cylindrical double anodes that have cable connectors cast on at both ends and that can be used in the construction of horizontal or vertical anode chains. Anodes of graphite or magnetite are more compact than anodes of high-silicon iron because of the danger of fracture. 

With deep anodes, a tube that allows gases to escape must be included to avoid a build-up of gas (see Section 9.1.3). The anode chains are supplied with cable, a centering device and a gas escape tube. 

Cable anodes of conducting polymers have an advantage when there are site problems with the installation of other anodes. They are extensively used for the cathodic protection of reinforcing steel in concrete (see Section 19.5.4). 

---