Resins acrylic monomer-based

Silicone reliners are supplied as either a one-component system that cures in the presence of moisture or heat, or a two-component system containing base and catalyst. Both types adhere poody to denture base and carmot be polished satisfactorily. Some silicones support propagation of bacteria such as Candida albicans. Acrylic-based sifloxane monomers and resins have been proposed for overcoming these deficiencies (211). 

Group of plastics based on resins generated from the polymerization of acrylic monomers (e.g., ethyl acrylate and methyl methacrylate). 

Residual acrylonitrile monomer may also occur in commercially-made polymeric materials used in rugs and other products. Estimated levels include acrylic and modacrylic fibers (less than 1 mg acrylonitrile/kg polymeric material), acrylonitrile-based resins (15 to 50 mg/kg), and nitrile rubber and latex (0 to 750 mg/kg) (IARC 1979 Miller and Villaume 1978). It is possible that acrylonitrile may evaporate into air or leach into water from these products, but no data on this topic were located. 

Two of the main considerations in the development of totally reactive liquid photopolymer systems are the resin(s) and the reactive diluents (monomers). The resins play a major role in determining the end properties and therefore the applications of the cured polymer. The reactive diluents are used to provide a fully reactive system with the appropriate reactivity, viscosity, coatability before cure and the desired crosslink density, chemical resistance and dielectric character once it is cured. The pho-toreactive monomers most commonly used are acrylate based derivatives because of the properties they impart, and their high reactivity and wide solubility range. 

Another approach is based on the copolymerisation of a mixture of two acrylic monomers. One is of the anionic type (or cationic) and the other one is poly-hydroxylated (Fig. 4.3). The latter is used to ensure the hydrophilic character necessary for the stationary phase. A limitation of these resins is their variable swelling, which depends on the composition of the mobile phase. They are normally used for medium pressure chromatography and certain biochemical applications. 

Ethyl acrylate monomer is used to make acrylic resins as well as emulsion (water-based) and solution (solvent-based) polymers. Water-based ethyl acrylate... 

Branched acrylic polymers based upon the copolymerization of acrylates and related monomers with methacrylate macromonomers are particularly useful in waterborne coatings. A macromonomer based upon isobutyl methacrylate, 2-ethylhexyl methacrylate, and 2-hydroxyethyl methacrylate was copolymerized with butyl acrylate, 2-hydroxyethyl acrylate, meth-acrylic acid, methyl methacrylate, and styrene.518 After neutralization with dimethylethanolamine or inorganic bases, the polymer could be cross-linked with melamine resin on a metal surface. These systems may be used for either pigmented layers or clear coats. 

Another metal chelating resin was looked at using CP/MAS [46] (Fig. 15.2.40). This resin was based on an salicylaldehyde acrylate monomer... 

Another approach for obtaining these stationary phases is based on the copolymerization of a mixture of two acrylic monomers. One is anionic (or cationic), according to the nature of the phase desired, and the other is polyhydroxylated (Figure 4.5), in order to ensure the hydrophilic character of the stationary phase. There is, however, an inconvenience with these resins as their rate of swelling depends upon the... 

Development of matrices for combinatorial organic synthesis — Radiation-induced grafting of styrene and several acrylate and methacrylate monomers onto fluoro polymers for their use as matrices for combinatorial organic synthesis which will allow solid phase synthesis to be extended to higher temperatures than are currently available with polystyrene and polypropoylene based resins [17],... 

---