Abrasive Automobile Polish

Charge the components in Part A to a steam-heated mixing vessel equipped with agitation. Start agitation and heat to 90C. 

In separate vessels, charge Part B and Part C components. When Part A reaches 90C and all the wax has melted, add Part B to the vessel followed by Part C. Apply cooling. 

In a separate vessel, prepare Part D by adding the Kaopolite SF to the water under agitation. Add Part 0 to Part A and continue cooling. NOTE The finished product is a paste. 

A stiffer paste can be prepared by increasing the oleic acid charge. 

---

Abrasives - [ALUMINUMCOMPOUNDS - ALUMINIUMOXIDE(ALUMINA) - CALCINED,TABULAR, AND ALUMINATE CEMENTS] (Vol 2) -m automobile polishes [POLISITES] (Vol 19) -for dental materials [DENTAL MATERIALS] (Vol 7) -for enameling [ENAMELS, PORCELAIN OR VITREOUS] (Vol 9) -nitrides as [NITRIDES] (Vol 17) -particle shape classification m [SIZE MEASUREMENT OF PARTICLES] (Vol 22) -phenolic resins PHENOLIC RESINS] (Vol 18) -PVB m [VINYL POLYMERS - VINYL ACETAL POLYMERS] (Vol 24) -silicon carbide m [CARBIDES - SILICONCARBIDE] (Vol 4) -standards and specification [MATERIALS STANDARDS AND SPECIFICATIONS] (Vol 16) -use m cosmetics [COSMETICS] (Vol 7) -use m electroplating cleaning pLECTROPLATING] (Vol 9)... 

---