Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About
0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | a | b | c | d | e | f | g | h | i | j | k | l | m | n | o | p | q | r | s | t | u | v | w | x | y | z

   |<      <<      >>     > |    


VI compares theoretical calculated with , with experimental t to s obtained from a values. At 202 and 125 , agreement is good but at 25 , where k is the highest, the calculated value is too low. The above

VI compares TPH values from the soil grab samples taken from the tops of the columns at difterent times during the water leaching and surfactant flooding

VI Comparison Between the Experimental Values Given in Table H

VI Comparison of Copolymers via Sequential and Direct Monomer Addition

VI Comparison of Deliveiy Rates at Six Weeks of Osmotic Devices Implanted in

VI Comparison of detection limits for different atomic absorption instruments.9

VI Comparison of Extraction Yields Between Different Digesters

VI Comparison of the Inhibitory Effect of Various Saccharides on the Agglutinating Activity of Four D-Mannose D-Glucose-speciflc Lectins

VI Comparison of THF vs. Ethanol at 72 Hours After

VI Comparison of water fliixes through heat treated asymmetric and homogeneous polyvinyl alcohol membranes

VI Comparison of Yq for Surfaces of Bulk Water and of High Energy Glasses Equilibrated at 95 RH

VI Composition of Gif systems for hydrocarbon oxidation

VI Composition of Some D-Galactoglucomannans from Plants

VI Composition of Sulfite Solutions at Different pH Values

VI CONSTANTS USED IN CALCULATING HEAT generation IN IRON

VI contains an example of results obtained when the proteins of rabbit reticulocytes, after the incorporation of labeled amino acids, were submitted to a variety of treatments. All the results are in accord with the interpretation that the labeled amino acids were incorporated by

VI contains analyses of 66 AGMS quadrantes, ca. 5 B.C. In comparing the AGMS quadrantes with the PTR and LSA, one sees from Table IV that the average iron content increases from PTR presumably the oldest coins have the lowest iron. This trend continues through the 4 B.C. quadrantes, as discussed in the next section. The average tin and antimony contents decrease significantly with time PTR

VI contains molecular second-order data for ferrocenyl and ruthen-ocenyl complexes. Ferrocenyl-type compounds had been shown to exhibit large bulk material SHG efficiencies axis and organic chromophore is unfavorable.

VI contains synthesis and rheological data for po1y GG.

VI contains the general properties for 50-60 HARD SEGMENT polymers. This table contains polymers which have been developed in the past such as the Polyurethanes in the 55 to 65 Shore D hardness which are more recent developments. This hard segment range also covers 65 to 75D intermediate modulus materials which are in reality toughened plastics. The raw materials prices are for comparison purposes.

VI contains the geometric parameters of the main structural . The X-ray data are presented in parentheses.

VI contains the performance data filtration for concentration and washing of

VI contains the regression Equations 6-12 pertaining to the data set on 2,4-dinitrophenols .

VI contains the results of these measurements.

VI Contents of Cluster Sites 1 and 2 in Bacterial Ferredoxins



   |<      <<      >>     > |    

SEARCH



© 2024 chempedia.info