Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About
0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | a | b | c | d | e | f | g | h | i | j | k | l | m | n | o | p | q | r | s | t | u | v | w | x | y | z

   |<      <<      >>     > |    


A 10 s isochronal creep modulus, measured at room temperature, as a function of draw ratio for a range of quenched

A 10 watt synchronous buck converter.

A 10 x 10 x 10 matrix of products can be made via 10 10 10 directed sorting synthesis steps.

A 10- il digital tnicrodispenser.

A 10- J.m interplanetary dust particle that is not porous and contains hydrated siUcates. The particle s elemental composition is a good match to solar

A 10-fluid array printhead

A 10-MeV portable electron accelerator.

A 10-month-old boy with Lesch-Nyhan syndrome. Sonogram of right kidney showing hyperechoic pyramids of different grades

A 10-storey frame with different distributions of dampers

A 10-tube parallel assembly of Foam-FVee vortex tubes shown bolted together off a central manifold inlet duct. Courtesy EGS Systems, Inc.

A 100 c.c. Graduated Cylinder Used in Measuring

A 100 kW sloping rotating plasma furnace. Reprinted from

A 100 MHz c-scan image made through the back side of the TEC focused and gated at the ceramic-to-solder interface. A relatively small percentage of voids can be seen at this interface level.

A 100 MHz c-scan image made through the back side of the TEC focused and gated deeper at the solder-to-copoer interface. A much higher percentage of voids or disbonds are noted at this interface level

A 100 MHz c-scan image made through the top side of the TEC focused and gated at the ceramic-to-snlder interfeice. A relatively small percentage of voids can be seen at this interface level.

A 100 MHz c-scan image made through the top side of the TEC focused and gated deeper at the soIder-to-coDoer interface. A much higher percentage of voids or disbonds are noted at this interface level.

A 100 nm x 100 run CCT-STM image of a freshly sputter-cleaned TiOjCl 10 surface. .

A 100 ps MD trajectory of PNP, plotted in the plane of the two largest principal components. The two darker regions, where the trajectory fluctuates locally, are two conformations. If we are interested in sampling many conformations, the long time the system spends in local fluctuations in a given conformation, is a waste of resources.

A 100-cell electrolysis module for submarine life support

A 100-keV transmissixm-ehctron-diffraction pattern of a single monolayer of tricosenoic add.

A 100-kHz sine-wave oscillator, with stable frequency and amplitude controls, was used to pulse the drive electrode. Each sensing electrode was connected to a current-to-voltage converter preamplifier. The preamplifier outputs were bandpass filtered at 100 kHz 5 Hz and amplitude-demodulated. The demodulated signals were amplified and DC-coupled to a first-order low-pass filter to give density signals.

A 1000 kVA gen set with dual-fuel diesel engine

A 1000-year record of organic matter humification preserved in a cave stalagmite,

A 110 slip plane in the halite structure

A 110-Lerhone bonded laminated propeller from a Nieuport scout of 1916-1920. .



   |<      <<      >>     > |    

SEARCH



© 2024 chempedia.info