Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About
0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | a | b | c | d | e | f | g | h | i | j | k | l | m | n | o | p | q | r | s | t | u | v | w | x | y | z

   |<      <<      >>     > |    


Cross-sections for the endothermic reaction Dj - CD D as a function of CM energy of the reactants,

Cross-sections for the endothermic reaction O CO CO O as a function of CM energy of reactants.

Cross-sections illustrating the definition of injection and control surfaces.

Cross-sections in the GIT process

Cross-sections in the plane of the cracks used in the computations. The dimensions are given in mm.

Cross-sections obtained with a - - H reaction at 1,8-eV total energy. The solid line indicates the values obtained without the vector potential and the dashed with a vector potential. The dashed line indicates the experimental results .

Cross-sections obtained with a basis set and the TDGH DVR

Cross-sections of 1.67 d tex Courtauld s SAF, oxidized in air for periods up to 3 h showing skin core effect. Source

Cross-sections of 4.2-mm-thick carbon fibre-reinforced polyether imide panels following air-blast testing . impulse 6.1 N s.

Cross-sections of 4.5-mm-thick glass Hbre-reinforced polyether imide panels following air-blast testing . impulse 9.4 N s.

Cross-sections of a cell . 1 electrolyte, 2 - anode, 3 - cathode, 4 - interconnect.

Cross-sections of a collimated beam.

Cross-sections of a factory ice cream freezer perpendicular to the axis of the barrel

Cross-sections of a submerged hollow fiber MF membrane cartridge.

Cross-sections of a three phase b Thermospan c EXP 4005 d HRA 929C after oxidation for three weeks at 800 C in air

Cross-sections of a typical inert or redox electrode, embedded is preferred if the metal is liable to melt or react when very hot.

Cross-sections of activated Ni hollow spheres made from alloys A, B, and C. The shell thickness for each sphere ranged from 700 to 800 pm and the perceived differences in thickness are due to how close or far away the cross-sections were taken from the top of the spheres.

Cross-sections of alumina support .

Cross-sections of an HPK gas-fired shaft kiln, incorporating internal arches

Cross-sections of basic die bonding and chip-connection methods.

Cross-sections of CA host channels sliced parallel to the direction of the channel methyl methacrylate.

Cross-sections of Carbon Whisker Membrane

Cross-sections of chip stacks.

Cross-sections of damages under pure rolling conditions

Cross-sections of damages under rolling-sliding conditions, g 1.5



   |<      <<      >>     > |    

SEARCH



© 2024 chempedia.info