Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | a | b | c | d | e | f | g | h | i | j | k | l | m | n | o | p | q | r | s | t | u | v | w | x | y | z

|< << >> > |

Cross-sectional view through central horizontal plane of 1.5L X cross-axis coil planet centrifuge. 1, Multilayer coil separation column 2, column holder 3, stationary miter gear 4, horizontal miter gears each equipped with toothed pulley 5, at peripheral end and 6, flow tubes.

Cross-sectional view through the central axis of the apparatus.

Cross-sectional view through the PASSflow reactor and setup of the flow system

Cross-sectional view, Libra 200 FE, dark field. Grain structure after deposition of a 250-nm film at room temperature.

Cross-sectional views and SDC-infiltrated LSCF cathodes with different concentrations of SDC solutions

Cross-sectional views depicting processes that result in photofaoilitation and electrofaoilltatlon of species A.

Cross-sectional views for a Maddock solidification experiment for a 63.5 mm diameter VBET screw running ABS resin at a screw speed of 60 rpm . The A and B channels are labeled along with the axial positions in diameters

Cross-sectional views for a Maddock solidification experiment for the ET screw at a letdown ratio of 220

Cross-sectional views for the conventional, single-flighted screw .

Cross-sectional views highlighting active site access solvent accessibility ofSgcC4 and RsTAL. The active site ofSgcC4 is significantly more encapsulated than that of RsTAL by virtue ofTyrSOS and Glu7L

Cross-sectional views of a a scalar volume expansion and b a vector M-shaped deformation in chaicogenide films Tanaka and Asao, 2006, copyright permission from the Japan Society of Applied Physics . Wide, open arrows falling on the films represent the size of light spots. The material flows along the z-directions thick, solid arrows govern the resultant deformations.

Cross-sectional views of a single drop of a water-dispersible red dye between sections of plain agar from Petri dishes to demonstrate the natural diffusion of nutrients through gels containing major fractions of water

Cross-sectional views of an ET screw at a letdown ratio of220

Cross-sectional views of back-illuminated polyvinyl alcohol coated over agar showing growth of Staphylococcus aureus the view in shows in the bacteria growth, polyvinyl alcohol and growth through the polyvinyl alcohol layer and into the agar

Cross-sectional views of extrudate samples at a letdown ratio of 100

Cross-sectional views of extrudate samples at a letdown ratio of 100 to 1 of a white pigmented ABS resin with a black color concentrate for a melting-mixing experiment. The samples were produced at screw speeds ranging from 30 to 150 rpm. The large round white regions for the cross sections at screw speeds of 90 rpm and higher are solid particles discharged with the extrudate

Cross-sectional views of extrudate samples for a DIV12 screw with either a singie-flighted metering tip or an Eagle mixing tip for a melting-mixing experiment

Cross-sectional views of extrudate samples obtained using a conventional screw with segmented tip for the testing of different types of dynamic mixers

Cross-sectional views of Hf02 films obtained by using a high-resolution TEM .

Cross-sectional views of impact sites showing the occurrence of cone cracking at 400 m s

Cross-sectional views of IPMCs fabricated without with permission from Cambridge University Press.

Cross-sectional views of lamellae configurations within a SAR step for Re 3.45. .

Cross-sectional views of microstructures produced by rectangular spiral raster patterns. Process- ing used the tool shown in

Cross-sectional views of normal and compression wood. Light micrograph of normal wood of loblolly pine at a growth ring boundary. Key

Cross-sectional views of plywood illustrating the effects of weathering on face veneers with selected grain patterns.

|< << >> > |

SEARCH

© 2024 chempedia.info