Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About
0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | a | b | c | d | e | f | g | h | i | j | k | l | m | n | o | p | q | r | s | t | u | v | w | x | y | z

   |<      <<      >>     > |    


Yield value vs. bentonite concentration

Yield versus modified residence time for conversion of an isomer mixture

Yield versus N for Middleton et al. data shown in Fignre 13-32. The results are close to mesomixing control, as shown by the closer agreement between small and large scale results when scaling is based on N.

Yield versus purity plot for 576-membered heterocyclic thioether library

Yield versus Temperature

Yield vs. calcium chloride content per total mass in reactions of the nonionic copolymer.

Yield vs. product concentration in shrinking-bed and non-shrinking-bed counter-current flow reactor. Substrate

Yield vs. purity in cutoff selection. For the distributions represented in

Yield vs. severity

Yield vs. time curves for copolymerization. A, spontaneous initiation with peroxidized monomer at —60 C B, normal UV initiation with pure monomer at —60 C C, UV initiation of peroxidized monomer at —60 C following storage

Yield Yq of desired mono-azo dye from 2-naphthol upon conducting the reaction in a tubular reactor with Kenics mixers for two different viscosities and declining rs. Throughput ratios of A

Yield Yq of desired mono-azo dye from 2-naphthol upon conducting the reaction in a tubular reactor with Sulzer mixers SMXL for two different viscosities and constant rs. Throughput ratios of A

Yield-Octane Relationship for Naphtha-Gas Reversion and Reforming of Straight-Run Gasoline

Yield-purity relation for batch and MCSCP capture of an lgC2 from an industrial titer using cation exchanger Fractogel SO3 .

Yield-stress-temperature curves of different flexibilized EP s.

Yielding at a crack tip and its effect on the fracture surfoce appearance. The two limiting cases are

Yielding in ductile materials, brittle materials, BCC iron and LiF. The C-D zone is the yield elongation region

Yielding support, principle .

Yields and ee values for ring-opened products prepared using Rhl catalyst in the presence of activated amines, malonates, or ammonium carboxylates.

Yields and enantioselectivities of reduction of meso anhydrides using BINAL-H ,

Yields and isomer distribution 78 and 79

Yields and regioselectivities achieved in the Rh-catalyzed reductive hydroformyiation.

Yields and selectivities comparison as a function of the split ratio between reacting and regenerating intervals. T 527 C, Period 1800 s, nicat 0.008 kg.

Yields as a function of hydrocarbon partial pressure hydroconverter residue.

Yields as a function of Soxhlet extraction time. Analysis by HPLC



   |<      <<      >>     > |    

SEARCH



© 2024 chempedia.info