Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About
0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | a | b | c | d | e | f | g | h | i | j | k | l | m | n | o | p | q | r | s | t | u | v | w | x | y | z

   |<      <<      >>     > |    


Yield strain for polyethylene at strain rates A 2.08 x Temperature and strain rate dependence of yield strain and deformation behavior in polyethylene. . Polym. Sci. B

Yield strain of PP and blends versus alloying content.

Yield strain of recycled PVC as a function of the content of stabilizer

Yield strains ey of PE-glass beads composites against 0, Different bead treatments are indicated with different marks.

Yield strength after exposure to Fuel C. Tensile tests at 120 C.

Yield strength after exposure to Fuel C. Tensile tests at room temperature.

Yield strength after exposure to M20. Tensile tests at 205 C.

Yield strength after exposure to M20. Tensile tests at room temperature.

Yield strength after exposure to M85. Tensile tests at 120 C.

Yield strength after exposure to M85. Tensile tests at room temperature.

Yield strength after exposure to sourgas. Tensile tests at 120 C.

Yield strength and tensile strength of ECTFE as a function of temperature.

Yield strength and tensile strength, with associated elongations atfracture, of lowconcentration H-Zr, H-V, and H-Nb alloys as functions of test temperature MosTO, Mos80 .

Yield strength and total elongation versus test temperature for a Fe-Ni-Mn-Cr high-entropy alloy .

Yield strength and Young s modulus vs. mold temperature for self-reinforced HDPE prepared in oscillating stress field

Yield strength data for steel as afunction of grain size rf . Plot shows dependence of yield stress on inverse power of grain size. The legends at the top of the hgure show the actual grain size as measnred in both im and nsing the ASTM nnits for grain size.

Yield strength for cold-worked 301 stainless steel.

Yield strength histogram for SAE 1018 cold drawn carbon steel bar

Yield strength in Mohr s circle. If the maximal shear stress r ax. determined by the principal stresses ai and crm, is smaller than the shear yield strength tf, no yielding occurs

Yield strength in relation lo grain size or particle spacing .

Yield strength increase with increasing dose at irradiation temperatures 350 C. For HT-9 the test and irradiation temperature is 360—400 C for 10 dpa .

Yield strength of AljTi under vacuum .

Yield strength of alloy 5083 and of steel.

Yield strength of cellulose polypropylene composite as a function of suspension conductance. Both cellulose and polypropylene treated by corona .

Yield strength of control samples .



   |<      <<      >>     > |    

SEARCH



© 2024 chempedia.info