Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About
0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | a | b | c | d | e | f | g | h | i | j | k | l | m | n | o | p | q | r | s | t | u | v | w | x | y | z

   |<      <<      >>     > |    


Yield of CO2 as a function

Yield of CO2 as a function of catalyst temperature in the oxidation of trimethylamine over single- and multi-component noble metal catalysts.

Yield of condensation products de-of polyethylene wax obtained by thermolysis in the pending on solvent. Adapted, by permission, from J

Yield of condensation products depending on solvent. Adapted, by permission, from J Jecza-lik, J. Polym. Set.

Yield of condensation products depending on solvent. Adapted, by permission, from J Jeczalik, J. Polym. Set

Yield of cotton fibre worldwide in pounds acre .

Yield of cracked product fractions from long-chain n-alkanes, converted on H-erionite at 613 K .

Yield of DEE , versus contact time.

Yield of dendritic deposit as a function of the ratio ac dc in the deposition of zinc from alkaline zincate solution.

Yield of deposition as a function of ablation depth for various polymers. See Table I for acronyms.

Yield of desired product B calculated from the two-phase bubbling bed model for irreversible consecutive reactions A C 0 and 0

Yield of desired product C for single, ideal CSTR, and as a function of internal flowrate, p .Qr f22, in a 2-CSTR mixing model.

Yield of DME with coke formation after precoking with i-butanol to different levels

Yield of ECC as function of time. Co823ACN, i activated carbon Sasuper, A activated carbon SX2

Yield of EG against yield of by-product DEG in an RD column for hydration of EO

Yield of epoxidized FAMEs vs. time obtained by epoxidation of a soya-bean oil FAME mixture over Ti-MCM-41 .

Yield of eS at five different ion pair encounter distances

Yield of eS in a diethyl ether and b toluene using an ion encounter radius of 5 A and scavenging radius of 4 A. An initial distance of 20 A between the ion pair was used. For both simulations a concentration of 0.5 M for scavengers was used. Standard error calculated on the final yield to one standard deviation is

Yield of eS obtained at 0.5 M of scavengers using an Onsager radius of 290A. a Both scavengeable species are given the same diffusion coefficient . Standard error on the

Yield of eS obtained at a 20A b 40A c 60 A and d 80 A. A scavenger concentration of 0.1M was used, together with a geminate and scavenging radius of 5 and 4 A respectiveiy. Standard error on the final yield to one standard deviation is

Yield of eS using a scavenger concentration of 0.1 M. An initial ion-pair separation of 20 A was used. Standard error calculated on the final yield to one standard deviation is

Yield of eS using a scavenger concentration of a 0.1M and b 0.5 M. An initial ion-pair separation of 20 A was used in both cases. Standard error calculated on the final yield to one standard deviation is

Yield of ETBE versus contact time. yield in C8 products at 363 K.

Yield of ethylacrolein versus yield of aldol with molar ratio of formaldehyde-to-butyraldehyde 3 to 1 in aqueous solvent at 50 - 70 C.

Yield of extract vs. rank percent MAF



   |<      <<      >>     > |    

SEARCH



© 2024 chempedia.info