Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About
0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | a | b | c | d | e | f | g | h | i | j | k | l | m | n | o | p | q | r | s | t | u | v | w | x | y | z

   |<      <<      >>     > |    


Volume fraction of pores, Vp, in dry copolymers of styrene with 10 DVB prepared in the presence of 20 of linear polystyrene of different molecular weight, M. Reprinted from with kind permission of Elsevier.

Volume fraction of the aqueous phase vs. temperature.

Volume fraction of the solvent vs. solubility parameter of solvents.

Volume fraction of the tetragonal phase as a function of composition for La-donor doped PZT determined by quantitative X-ray analysis.

Volume fraction p of the solute plotted against the rate of overlap CX3, for various molecular masses M polystyrene and benzene.

Volume fraction polymer in equilibrium phases for chains of different length, Experimental curves for the molecular weights indicated, with temperature as the ordinate. Reprinted with permission from A. R. Shultz and P. J. Flory, J. Am. Chem. Soc. 74

Volume fraction profile for brush.

Volume fraction profile of 280,000-molecular-weight poly adsorbed onto deuterated polystyrene latex at a surface density of 1.21 mg m and suspended in D2O, from Ref. 70.

Volume fraction profile of dPS b PMMA copolymer chains segregated to the PS PMMA interface. The shaded region indicates the interface excess. The volume haction of copolymer chains in the PS phase is l 0.0033. The volume

Volume fraction profile of dPS-i -PMMA copolymer chains segregated to the PS-PMMA interface. The shaded region indicates the interface excess. The volume fraction of copolymer chains in the PS phase is 0.0044. The sample was annealed at 162 Cforl00h

Volume fraction profile p theory. Parameters

Volume fraction profiles at phase coexistence. From Flebbe et al.

Volume fraction profiles determined from modelling reflectivity profiles for blends of a PS-PMMA diblock with 5wt of rfPS

Volume fraction profiles for adsorption .

Volume fraction profiles for polystyrenes adsorbed onto quartz plates in the modified SFA apparatus of figure 3.32

Volume fraction profiles for tail segments using the Monte Carlo simulation method. 0 0.8. The other parameters are given in Table 3. A1B18A1 and A1B19 and B20 .

Volume fraction profiles for the PS brush layer of a PDMS-PS block copolymer at the air ethyl benzoate interface. The dashed line is the best fit to neutron reflectometry data. The solid line is the volume fraction profile predicted by the self-consistent field theory of Baranowski and Whitmore .

Volume fraction profiles main

Volume fraction profiles obtained by neutron reflectivity for poly.

Volume fraction profiles of an end-grafted polystyrene brush, of relative molecular mass 105 000, imder various solvent conditions .

Volume fraction profiles of fluorocarbon groups of backbone 0.35. The distance r is given in A.

Volume fraction profiles of the PS and PMMA homopolymers thin solid lines , the PS and PMMA blocks of the PS b PMMA copolymer dashed lines , and the total PS and PMMA segments summed over the homopolymer and the respective copolymer blocks thick solid lines . The results were obtained by simultaneous analysis of neutron reflectivity experiments with different deuterium labeling of copolymer and homopolymer segments

Volume fraction profiles of the PS and PMMA homopolymers thin solid lines , the PS and PMMA blocks of the PS- -PMMA copolymer dashed lines , and the total PS and PMMA segments summed over the homopolymer and the respective copolymer blocks thick solid lines . The results were obtained by simultaneous analysis of neutron reflectivity experiments with different deuterium labeling of copolymer and homopolymer segments

Volume fraction versus compressive yield stress of a flocculated polydisperse alumina suspension in decalin with various magnitudes of the attractive particle interaction energy.

Volume fraction versus depth profile for a standard. The average volume fraction is 0.55.



   |<      <<      >>     > |    

SEARCH



© 2024 chempedia.info