Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About
0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | a | b | c | d | e | f | g | h | i | j | k | l | m | n | o | p | q | r | s | t | u | v | w | x | y | z

   |<      <<      >>     > |    


C is intensity divided by substrate intensity perfluorinated thiol, respectively. Error bars were estimated from the signal-to-noise ratios.

C Is nexafs spectra for a series of polymers that have carbonyl functional groups in different local electronic environments. Reproduced from Ref. 2.

C Is nexafs spectra for a series of unsaturated polymers, recorded with the Stony Brook STXM. Reproduced from Ref 1.

C Is NEXAFS spectra of isolated humic substances of different molecular sizes with permission from Scheinost et al.

C Is nexafs spectra of polystyrene recorded with a resolving power of about 6100. The area of the C Is jt transition is

C Is NEXAFS spectrum of bovine serum albumin .

C Is peak of silicone grafted with PHEMA, recorded Elsevier Limited

C Is peaks of PS and TCPS conditioned with phosphate buffer . From Ref 332

C Is photoemission spectra recorded after dosing oxygen to ZrC at 500 K. Reprinted with permission from . Copyright 2005 by the American Physical Society

C is plotted for different type-I clathrates versus the guest free space, an analysis done for many type-I clathrates by Suekuni et al. . For calculating the guest free space

C Is quite interesting. It also Is a heterogeneous mixture of many components. However, it Is different from 10.23 In the fact that there is one component in this set which has a sedimentation coefficient far removed from the rest of the components. This component moves faster and the rest of the components differ little in their sedimentation coefficients and lag behind. The component moving ahead has a sedimentation coefficient higher than the rest of the components. Make a plot of the derivative of the concentration curve for this too. In what way would it be different from the others

C Is spectra from a thick and a thin PMDA film.

C Is spectra from filler surfaces following interaction with MPS.

C Is spectra from polyamic acid on Cr, cured polyamic acid on Cr

C Is spectra of the Si C CMS composite electrodes upon the first discharge chaige cycle

C Is spectra recorded . The solid curves represent the results of a curve fitting procedure.

C Is spectrum from poly-vinyltrifluoroacetate

C Is spectrum of a complex fluorocarbon surfactant. The assignment of the individual components is as follows

C Is spectrum of a polyimide film.

C Is spectrum of PLA demonstrating chemical shifts of different carbon enwron-

C is the bifurcation diagram for the ethanol concentration.

C is the burner, D the monochromator, E the photomultiplier detector, and F the computer for data analysis. In the single beam instrument, the beam from the lamp is modulated by the beam chopper , and is then recombined with the sample beam by a half-silvered mirror.

C is the result of a calculation that illustrates which cations might fit into sixfold coordination position in the calcite group structures. It is an interesting insight as both light and heavy rare earth elements are possible substitutes for calcium in the calcium carbonate structure, i.e., they plot within 15 of the calcium ionic size. However, some of the end-members incorporate elements into this crystal structure and are outside this deviation but within 30 , an expression of the potential physical expansion for this layered crystal structure. These are ionic charge differences important in whether a stable crystalline structure can be produced. Trace amounts of all these ions can be incorporated in calcite and may dictate the morphology of the crystallites. Therefore, the presence and amount of any ions in the environment in which carbonate crystallization occurs may possibly be recorded. However, in spite of the predominance of sodium and potassium in the solutions where

C Is X-ray photoelectron spectra from graphene sheets grown epitaxially in multilayer stacks on SiC. Spectra are shown for the as-grown surface and the surface following two transfers. Reprinted from Unarunotai, S., Koepke, J. C., Tsai, C. -L., Du, F., Chialvo, C. E., Murata, Y., Haasch, R., Petrov, I., Mason, N., Shim, M., Lyding, J., Rogers, J. A.

C Is XPD pattern, using a Mg source, from monolayer films of Ceo adsorbed on



   |<      <<      >>     > |    

SEARCH



© 2024 chempedia.info