Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About
0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | a | b | c | d | e | f | g | h | i | j | k | l | m | n | o | p | q | r | s | t | u | v | w | x | y | z

   |<      <<      >>     > |    


Typical values for the scalar couplings in perdeuterated proteins, which can be used for the coherence transfer through the spin system . The boxes, circles, and triangles indicate correlations established in the corresponding pulse scheme.

Typical values of cm mol vs. 10 Data for CH4 C4H10

Typical values of kp obtained by fitting the data of Tan and Liou and values estimated from two different correlations.

Typical values of lanthanide distribution coefficients for common, rock-forming minerals. Values for apatite inferred from analysis of Skaergaard intrusion .

Typical values of mole MgCOs in planktonic foraminifera, abiotic marine calcite, and inorganic precipitates from laboratory studies.

Typical values of the concentration of CO in the substates 8i, jSa, and 3 during adsorption. Redrawn from Ehrlich 27 . Reproduced by permission of the American Institute of Physics.

Typical values of the content of

Typical values of the electronic conductivity of the various classes of conducting solids, including ECPs in their doped and undoped form, in comparison with metal under ambient conditions.

Typical values of the second virial coefftcient .

Typical values of the washout coefficient as a function of rainfall rate and particle diameter. Source

Typical valve and pump head design for a high pressure plunger pump

Typical valve characteristics.

Typical valve codes and specifications. By permission, Borden Chemicals and Plastics Operating Limited Partnership.

Typical valve configuration for multidimensional chromatography where the interfering matrix is retained on the guard column, whereas the analytes of interest are resolved on the analytical column.

Typical Van Deemter H u curves a 3 pm

Typical Van Deemter Plot showing optimal flow rate.

Typical van Deemter plot. Courtesy of Open-Tubular Column Gas Chromatography, by Lee, Yang, and Battle, John Wiley Sons, Inc., 1984. Reprinted by permission of John Wiley Sons, Inc.

Typical van der Waals Isotherms for Finely Ground Activated Carbons.

Typical vapor degreasing equipment.

Typical vapor liquid separator.

Typical vapor phase epitaxy system.

Typical vapor-phase chromatography record for the separation of alcohols.

Typical vapor-solid adsorption desorption isotherm.

Typical vapour and liquid conditions

Typical vapour-liquid equilibrium curves a system obeying Henry s law b regular system c system of close-boiling components d azeotrope.



   |<      <<      >>     > |    

SEARCH



© 2024 chempedia.info