Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About
0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | a | b | c | d | e | f | g | h | i | j | k | l | m | n | o | p | q | r | s | t | u | v | w | x | y | z

   |<      <<      >>     > |    


Typical tubular ultrafiltration module design. The membrane is usually cast on a porous fiberglass or paper support, which is then nested inside a plastic or steel support tube. In the past, each plastic housing contained a single 2- to 3-cm-diameter tube. More recently, several 0.5- to 1.0-cm-diameter tubes, nested inside single housings, have been introduced.

Typical tumor volume and distribution in metastatic cancer to the liver. Resin microsphere radiation activity planning can be performed via two of the three methods recommended by the manufacturer. The distribution of disease is such that the third method - the partition method - is not valid in this case

Typical tumour-associated O-glycans found on mucins.

Typical tunneling spectra measured above Gd at 29, 171, 293, and 357 K topography similar to

Typical tunneling spectra observed on the as-cleaved surfaces of Bi2212 at 4.2 K. Spectra are characterized by a superconducting gap with V-shaped background. The sample bias voltage and the set-point currents are

Typical turbocharger overall net transfer efficiency curve.

Typical turbocharger RO flow scheme.

Typical turbulent impellers . By permission from Tatterson .

Typical turnover CV of a G. sulfurreducetis biofilm respiring on an electrode and the corresponding counter electrode potential during the scan.

Typical TWC conversion efficiency plot for hydrocarbons , CO, and NO, as a function of air-fuel ratio. Also shown are representative air-fuel ratio vs. time traces for 1986 and 1990 vehicles with control bandwidth mapped onto the catalyst efficiency plot.

Typical twin blow tank arrangement.

Typical two- and three-bond coupling constants for nonidentical vicinal protons protons on the same carbon couple with a relatively small coupling constant compared to those on adjacent carbons.

Typical two- and three-electrode cells used in electrochemical experiments, a Two-electrode cell for polarography. The working electrode is a dropping mercury electrode . Copyright 1973, American Chemical Society. Three-electrode cells for bulk electrolysis are shown in

Typical two-bed AC adsorption system.

Typical two-bond F-N coupling constants

Typical two-dimensional finite element mesh at increasing magnification.

Typical two-dimensional potential profiles on a polymer-covered zinc substrate as measured with the SKP in -

Typical two-loop Lamb shift diagrams.

Typical two-phase flow patterns

Typical two-piece mould for injection moulding

Typical two-roll rubber mill with features recommended for milling

Typical two-stage devolatilizing extruder

Typical two-stage MTBE synthesis process. Source

Typical two-step synthesis of phosphinines and some examples.

Typical two-zone wall temperature profile normalized by Tin-



   |<      <<      >>     > |    

SEARCH



© 2024 chempedia.info