Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About
0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | a | b | c | d | e | f | g | h | i | j | k | l | m | n | o | p | q | r | s | t | u | v | w | x | y | z

   |<      <<      >>     > |    


Typical trajectories of a Gaussian stochastic process x.

Typical trajectories of process variables in one run of a batch process .

Typical trajectories of the unit orientation vector for a single ellipsoid revolution in two different systems, at four temperatures

Typical trajectory at 100 K, a side views showing adsorption during the initial stage of adsorption and at the late stage of 1280 ps, and

Typical transdermal drug delivery system designs.

Typical transdermal matrix system with overlap tab.

Typical transducer response to droplet-fat interface coalescence. Copyright 2001 by Marcel Dekker, Inc.

Typical transfer characteristics of a digital integrated circuit.

Typical transfer characteristics of the bipolar polymer blend FETs in .

Typical transformations during phase transformations at Aps 1

Typical transformations of p-hydroxyisobutyric acid.

Typical transformer vector groupings and connection arrangements

Typical transient absorption decays at 970 nm of the carotenoid radical cations of C-P-Q triads 2 and 4-6. The decays were measured in dichloromethane solution following excitation with a 590-nm laser pulse. The relative AA values reflect the relative quantum yields of C -P-Q .

Typical transient absorption set-up using a subpicosecond laser source as the pump and a continuum of white light as the probe. For ultrashort time resolution additional stages for compensating the group velocity dispersion in both light pulses are needed. P

Typical transient current pulses for holes in amorphous selenium , illustrating the effect of temperature on the degree of the dispersion in carrier transport. Left

Typical transient response characteristic for hole carrier transport in a-As2Sc3 at room temperature. The behavior is displayed with both linear axes of current and time.

Typical transient response methods

Typical transient response of a La0 9Sr0 Mn03 electrode to

Typical transient responses of the copolymerized propylene-butyl-fihn-coated sensor for various gases with concentrations of 5,000 ppm. A

Typical transient signal from the Sir Galahad instrument.

Typical transient spectrum showing the wavepacket dynamics in the strongly bound B state of I2. The period of 300 fs reflects the oscillatory motion between the two turning points. Adapted from Bowman, Dantus, and Zewail .

Typical transients for the fragmentation I2 Ne -E Ne for several states. Notice how the lifetime increases as decreases. Adapted from Willberg et al, 3. Chem. Phys., 1992, 96

Typical transistor characteristics

Typical transition behavior in mechanical storage modulus for a semicrystalline polymer. The subscripts a and c refer to the amorphous and crystalline phases, of the polymer, with aa as the main 7g process.

Typical transition behaviour in mechanical storage modulus and damping for a semi-crystalline polymer. Subscripts a and c refer to the amorphous and crystalline phase respectively. Thus is the main process.



   |<      <<      >>     > |    

SEARCH



© 2024 chempedia.info