Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About
0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | a | b | c | d | e | f | g | h | i | j | k | l | m | n | o | p | q | r | s | t | u | v | w | x | y | z

   |<      <<      >>     > |    


TMA Penetration Behavior of PS PiBM Diblock Copolymer and Carboxylated Ionomer Obtained after hydrolysis.

TMA Penetration Curves for n-Butyl Acrylate Sulfonated Styrene Ion-Containing Copolymers.

TMA penetration curves load

TMA penetration curves of the PEUU s with different soft segment lengths.

TMA penetration tests to detect relative states of cure of a thermoset polyester. The more highly cross-linked material softens at a higher temperature, undergoes less penetration, and is more abrasion-resistant.--No load 50-g load .

TMA plot of the curing of a PF resin on beech wood. Heating rate 10 C min. Numbers in the figure are temperatures in C. first derivative curve.

TMA probe types

TMA response of defect for samples giving the DSC response, as shown in

TMA results of 50 nm film of PMMA, no apparent transition

TMA results of 660 nm film superimposed on blank silicon wafer.39

TMA s of model polymers.

TMA salts in fluorodenitration reactions.

TMA signal .

TMA temperature calibration using indium . Heating rate

TMA thermal expansion curves for platinum, alumina, and fused quartz .

TMA thermograms showing the thermomechanical behavior of PP matrix and PP nanocomposites and nanobiocomposites. I. Na. Sim et al.

TMA-DTMA Compression Profile for Process 2 Residue

TMA840 Stage and Probe Arrangement

TMAC variation of i 1 and i 10 flows as a function of the normalized gas-wall potential strength ratio

TMAE analytical HPLC chromatogram, showing 260 nm absorbance traces of an non-in-fected cell harvest control . Chromatograms were generated using a HP 1100 system with a Fractogel EMD Tentacle Ion-Exchanger resin in a

TMAFM height . The Root Mean Square roughness of the height image is about 1.6 nm illustrating the flatness of such a thin film. The phase contrast shows the morphology of the copolymer. The inset shows that the PMMA domains are locally arranged in a centered hexagonal structure.

TMAFM image of a thin film

TMAFM image taken at ambient conditions of a TTF-TCNQ thin film , revealing its polycrystalline morphology. Reprinted from Surface Science, Vol. 482 85, C. Rojas, J. Caro, M. Gri-oni and J. Fraxedas, Surface characterization of metallic molecular organic thin films

TMAFM images of a

TMAFM images of nanovolcanoes formed at the surface of an EDT-TTF- 2 pm x 2 pm. The illumination is set in such a way that the feature appears like a volcano seen by a satellite.



   |<      <<      >>     > |    

SEARCH



© 2024 chempedia.info