Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About
0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | a | b | c | d | e | f | g | h | i | j | k | l | m | n | o | p | q | r | s | t | u | v | w | x | y | z

   |<      <<      >>     > |    


TM-AFM phase image of a 74-nm-thick Pc film deposited on a 100 nm-thick PVP layer that has been aged for 6 months. In b, the black squares highlight the screw dislocations

TM-AFM phase image of PP shish-kebob crystals on sibcon

TM-AFM phase image of shish kebob morphology in oriented elastomeric PE

TM-AFM phase image of the residual indentation imprints on a PE sample after four indentations in the applied load range 0.6—4.8 iN. Single lamellae can be tested through indentations performed at tiny loads as well as several lamellae at larger loads.

TM-AFM phase images of .

TM-AFM phase images of 2 x 2 pm2. Reproduced with permission from . Copyright 2003. Elsevier

TM-AFM phase images of cured samples of .

TM-AFM phase images of lamellae in PEO films film thicknesses left

TM-AFM phase images of Nafion 117 ionomer membrane after exposure to

TM-AFM phase images of PEOpy-49 films with various thicknesses on oxidized silicon

TM-AFM topography images for RR-P3HT

TM-AFM typical images 500 x 500nm

TM-centred bond lengths in AIMD models of amorphous and crystalline doped GST, compared with the Ge-centred average bond length, n, in undoped c-GST. A crystallized model of scandium-doped GST is shown in the left-hand panel, together with the local bonding environment

Tm-Co-Ge, isothermal sections at 1070 K . Compounds with unknown crystal structure

Tm-cTi absorption and polarization spectra of naphthalene-dg in 3-methylpentane at 77 K

TM-fee aerobic W-alkylation of anilines, certain heteroarylamines, and sulfinamides with alcohols under air

Tm-Li-Ge, isothermal section at 470 K. The dashed line indicates the liquid immiscibility gap region.

TM-light mode spectra guided into the LBK polymer film consisting of I56P210 monolayers. Dark, UV, and B refer, respectively, to the angular position of the mode before any irradiation, after a 360-nm UV-light irradiation, and after 450 nm blue-light irradiation.

Tm-Ni-Al, partial isothermal section at 1070 K .

Tm-Ni-Ge, isothermal sections at 870 K , and schematic of phase equilibria for arc-melted alloys. Compounds with unknown crystal structure

Tm-Ni-Ge, isothermal sections at 870K .

TM-NSOM was lied to a test sample of layered polyediylene . Copyright 1997 American Chemical Society.

TM-projected partial densities of states

TMA curve for poly 35J

TMA curve for polyfethylene terephthalate thermomechanical curve



   |<      <<      >>     > |    

SEARCH



© 2024 chempedia.info