Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About
0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | a | b | c | d | e | f | g | h | i | j | k | l | m | n | o | p | q | r | s | t | u | v | w | x | y | z

   |<      <<      >>     > |    


MWD of polystyrene obtained with ACCIO4 at 0 C

MWD of polystyrene obtained with BFjOEt2 at 0 C

MWD of star-shaped poly obtained in toluene at - 40 C

MWD of the products obtained from the reaction of living poly with divinyl ether 1 in toluene at - 40 C

MWD of the reaction mixture. Samples taken during the pol unerization of multiacrylate .

MWD of the reaction mixtures. Samples taken during the polymerization of multimethacrylate with various molecular weights

MWD predicted by the model at 50 C and 20.4 MPa using different monomer concentrations

MWD predicted by the model under the operating conditions reported in Table 5.5

MWD predicted by the model with CvDF 3.1 mol L at 50 C and different densities

MWD properties of samples from

MWD ultrasonic caliper

MWD ultrasonic caliper and gas influx log. Courtesy Anadrill .

MWDs averaged over the sample thickness for the film at different times from the experimental data and the two-scale model. Source

MWDs change during degradation for end sole chain scission hydrolysis , respectively. Solid lines are MWDs before degradation, while the dashed lines are MWDs after degradation.

MWDs for F-PHEA absorbed into the perfusate 120 minutes after administration. In these two cases the administered polymer was characterized by Mw 8.6 and NL 5.3 kD. For comparative purposes the MWD is also shown for a smaller polymer which is absorbed in effectively the same MWD as it is administered

MWDs of E A resulting from PLP experiments at 100 Hz and various temperatures. MWDs are calculated using new estimates for the Mark-Houwink parameters of

MWDs of PDLA, PGA and their copolymers of different copolymer ratio

MWDs of poly to illustrate the three general methods for living cationic polymerizations at -15 C

MWDs of polymer chains having m branching points and their totai distribution of comb poiymer.

MWDs of polystyrene obtained with the l-phenylethyl chloride SnCl4 initiating system in CH2Cl2 solvent at - 15 C

MWDs of samples of cotton fiber at different stages of development

MWDs under the operation conditions of original and enhanced productivity.

MWe SCOTT-R

MWHT end caps structures

MWK ammonia plant, Texas City . Reproduced with the permission of PenWell.



   |<      <<      >>     > |    

SEARCH



© 2024 chempedia.info