Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About
0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | a | b | c | d | e | f | g | h | i | j | k | l | m | n | o | p | q | r | s | t | u | v | w | x | y | z

   |<      <<      >>     > |    


Model compounds used to elucidate and mechanisms

Model compounds used to parameterize the AMBER 4.1 force field database. Partial atomic charges for new phosphorothioate for inclusion with existing nucleic acids.

Model compounds used to represent biomass pyrolysis oils. Ihe asterisks represent sites that can potentially reaction with formaldehyde under stand PF resin synthesis conditions.

Model compounds with increasing diazonium character of the N N bond

Model compounds.

Model computation for the demetallation rate as a function of pore size and time on stream for first-order kinetics and configurational diffusion of a 12.5-A-diameter metal-bearing molecule .

Model computation of the effect of pore size on catalyst stability using first-order kinetics and configurational diffusion for a 12.5- A-diameter metal-bearing molecule .

Model concentration profile at the membrane-solution interface during electrodialysis and of the concentrated solution, respectively 5m, is the thickness of ion exchange membrane, 5i and d2 the thickness of the diffusion boundary layer at the desalting side and concentrated side, respectively t and t are the transport numbers of the cation in the solution and in the membrane, I is the current density, D and Dm are diffusion coefficients of electrolyte in the solution and in the membrane.

Model concentration profiles, c,, of the free monomers and micelles at a given moment t. The interface is located at x 0 8, 0 and S 0 are the points of smooth matching of the sine and cosine with the respective constant concentrations in the bulk.

Model concept about the development of phosphorite layer in an anoxic sediment on the shelf off the coast of Namibia reaches a stationary condition in pore water which is determined by release rates, precipitation and diffusion-dependent transport.

Model concept of CPOM deposition process with ripple.

Model concept of the contact charging of polymer grains, a Contact between an electron pair donator domain domain, remain on the particles surface

Model concepts related to the development of the situation shown in

Model configurations for Pt particles in Pt silica .

Model consideration for liquid crystalline polymers

Model consideration of slurry drying

Model construction of a fibrous layer. E and Gf denote the elastic tensile and shear modulus for the fiber. Reprinted from Ref 51. Copyright , with permission from Excerpta Medica Inc.

Model construction of a fibrous layer. Ei and Gf denote the elastic tensile and shear modulus for the fiber. Reprinted from Ref. 51. Copyright , with permission from Excerpta Medica Inc.

Model contrast parameters kc and ftp calculated with Eqs. as functions of temperature for w 0.25. The shaded area indicates the region where phase separation occurs.

Model contrast parameters kc and kp calculated with Eqs. a — 0.25. The shaded area indicates the region where phase separation occurs.

Model cover page for an SOP, containing the minimally necessary information

Model creation in disciplines

Model cross-coupling reaction nPH2 , with n 3 and 6. Energies include ZPE, in kcalmol . Adapted with permission from Ref. . Copyright 2005, American Chemical Society.

Model cross-metathesis reaction.

Model curing schedule for 3BS SLI plates.



   |<      <<      >>     > |    

SEARCH



© 2024 chempedia.info