Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About
0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | a | b | c | d | e | f | g | h | i | j | k | l | m | n | o | p | q | r | s | t | u | v | w | x | y | z

   |<      <<      >>     > |    


Modarate level in two tasks

ModBase, a database of comparative protein stracture models. Screenshots of the following ModBase panels are shown

Modds for calculation of acid strength.

Mode 1 rollover with LIN LOX mixture. Initial density difference 19 kg m . High heat flux of 67 W m into lower layer only

Mode 1 rollover with plumes penetrating upper layer

Mode 11 crack with an incipient dislocation along prolongation of the crack plane .

Mode 2 cross wave in a 2D wave channel.

Mode 2 rollover with LIN LOX mixture. Initial density 8.7 kg ttf . Low heat fluxes of 3.6 and 4.2 W m into upper and lower layers respectively

Mode 2 rollover, with plumes breaking into surface sub-layer

Mode Chemical Support Annex, .

Mode density spectrum with a

Mode density spectrum with a PBG. The atomic frequency u at is inside a PBG, near the cutoff frequency u o and defect mode frequency cOd-

Mode diagram.

Mode diagrams for a dielectric planar waveguide with refractive indices of 1.52, n 2.1, c 1.333 at Xq 675 nm. TM modes

Mode diameter of ferrite particles formed from solutions containing Se.

Mode dispersion curves of a three-layer slab waveguide.

Mode for a structure giving rise to the diffraction pattern in

Mode Griineisen parameters for IR- and Raman-active intramolecular modes in C60 and C70. Squares - Raman data for C60, dots - IR data for C70, open circles - Raman data for C70. Reprinted with permission from

Mode HI critical stress intensity factor vs. hollow microsphere content for ME and MEH

Mode I crack field in polar coordinates.

Mode I potential energy release rate, GJ, plotted as a function of crack extension, Aa, for carbon fiber composites containing different matrices

Mode I stress intensity factor for a surface crack in FGM coating, hi hi.

Mode I stress intensity factor for a surface crack in FGM coating, Phi 0.375.

Mode I stress intensity factor in an

Mode I stress intensity factor versus crack depth for small flaw fracture tests in IG-11 graphite.



   |<      <<      >>     > |    

SEARCH



© 2024 chempedia.info