Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About
0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | a | b | c | d | e | f | g | h | i | j | k | l | m | n | o | p | q | r | s | t | u | v | w | x | y | z

   |<      <<      >>     > |    


IPCE spectra of a titania nanotube array obtained by anodization in H2O KF in 1 M H2SO4 under 500 mV vs SCE applied potential bias

IPCE spectra of bare mesoporous NiO in iodide triiodide electrolyte

IPCE spectra of Bi2S3 Ti02 system biased at —0.5 V vs SCE. The negative bias is chosen from minimizing the dark background from electrochemical oxidation of sulfides

IPCE spectra of P3HT

IPCE spectra of Ru22 obtained in the presence different electron transfer mediators.

IPCE spectra of the selectively positioned three-dye cell and those of the single-dye cell with P5 on the bottom, N719 in the middle and N749 on the top of the Ti02 film. Reprinted with permission from Lee et al., 2009. Copyright Macmillan Publishers Ltd

IPCE spectra Pot two metal-free oiganic indoline dyes

IPCE spectrum for a spray-deposited BiV04 photoanode on FTO glass, recorded at a potential of 1.23 Vrhe in a 0.15 M K2SO4 aqueous electrolyte solution

IPCF activation for one-pot esterification of N-protected amino acids. Some examples are given in table 3-16.

IPCS guidance documents for exposure assessment

IPEC 472 nonuniformity and defect data

Ipecacuanha and related alkaloids .

Ipecacuanhae radix

IPEK inleipretalion of the Tribological Testing Chain

IPES surface . Feature D is a direct transition in the bulk band structure, while S a surface state. Feature A is an oxygen-induced orbital. Oxygen attenuated peak at 2.0 eV represents the occupancy of the empty surface states by antibonding dipoles

IPG-DALT of membranes from Streptococcus cremoris solubilized with urea and Nonidet P40. 1st dimension

IPH may mask small mid-anterior infarction. In this situation, when in presence of an IPH, the ventricular depolarisation initiating area . This allows the initial part of the

IPL evaluation using ETA 218

IpLN OC

IPMC actuation under a 1.22 V voltage with permission from Cambridge University Press.

IPMC actuator response for square and saw tooth wave input at 2.5 Volts rms and a current of about 20 milliamps

IPMC diaphragm . Table 9.3 Material properties and thicknesses of an IPMC diaphragm.

IPMC stirrer attached to the tip of a catheter and actuated in a saline fluidic environment resembling blood

IPN sample resistances in organic solvent 20

IPNS-product complex



   |<      <<      >>     > |    

SEARCH



© 2024 chempedia.info