Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About
0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | a | b | c | d | e | f | g | h | i | j | k | l | m | n | o | p | q | r | s | t | u | v | w | x | y | z

   |<      <<      >>     > |    


In fact, there is a favorable reactant composition profile, and this is essential for good performance, hr other words, the conventional feed arrangement is already a good choice, and the optimized feed trays provide a small improvement in the reactant distribution.

In fact, unfavourable steric interactions developing between the C-3 methyl group and the bulky C 0 -Al- complex are minimized in the transition state 25.6, which eventually collapses to lactone 11.10 98 .

In fact, virtually all of the statements made before on the sinusoidal technique are valid for the square-wave mode except for the rigid shape of its wave this conclusion is according to expectation, especially as Fourier analysis reveals the square wave to be a summation of a series of only

In fact, when placed in the reaction medium in the dark, are present are in accord with the mechanism outlined in

In fatty acid esterification, the catalyst surface hydrophobicity is a key factor. Too few acid sites result in low activity, but too many lead to water adsorption and deactivation.

In FeiC. Each iron atom has three terminally

In FGM layer, the thermal stress curves in

In field electron microscopy, or FEM, the negative voltage applied to a metal tip .

In Figs. 8.14c,d, the laser is focused on terminus A and emission is at terminus B. The situation is almost the same. Figure 8.14e shows the incident polarization dependence of emission in detail. Data A mean the emission is at the other terminus. We use 0 definition of 0 is described in

In Figure 6 there are displayed the variations of the total energy with the molecule-cluster distance in the nine canonical approaches described in

In Figure a 5 change in MW is called for. During the transient, S varies quite markedly before returning to its steady value. MW is well behaved. Note that the duration of the transient is on the order of 6 hours.

In Figures 3b and 3c, the carrier was moved 10 and 20 MHz away from the resonance. It is evident that the amplitude of the emission remains constant. The beat frequency changes from 25 to 5 MHz from

In Fijj. 3.3.A, the steel liner adjacent to.the concrete serves to absorb radiation from the thermal column in a-manner analogous to the thermal shield around the reactor proper. The cadmium- sheet next to the steel absorbs impinging slow neutrons so that the steel liner will exhibit a minimum of induced radioactivity after pile shutdown.

In Five upconversion imaging,

In fixed fields and at higher temperatures there is evidence for a 1 pg behavior. The effect of a field is to extend this 1 po behavior down to lower temperatures. Ap p0 is not proportional to H2.

In FKBP12, Ile-90 contributes to a hydrophobic groove created by Phe-36 and the hemiketal ring of FK506

In flunarizine and in flufenisal fluorine atoms in para position prevent metabolic hydroxylation.

In for different absorptive step potentials, see Eq. . 0 thick solid

In force field calculations, different levels of approximations are used to reproduce the stretching and compression of chemical bonds The plot shows a Morse potential energy function siipenmposed with various power series approximations Note that the bottoms of the curves, representing the bond length for most chemical bonds of interest to medicinal chemists, almost overlap exactly. This nearly perfect fit in the bonding region is the reason simple harmonic functions can be used to calculate tx nd lengths for unstrained molecular structures in the force lield method.

In forming these clusters, a target diameter of 0.50 was set for each cluster in the final solution. The diameter reflects the strength of association within the cluster. Because the similarity data are frequencies of co-occurrence, a diameter of 0.50 means that each item in a cluster was associated with every other item in the cluster at least 50 of the time . This percentage reflects much better than chance performance in grouping the items and provides a strong test of how well students learned the necessary characteristics defining the situations. It also provides evidence that the characteristics were learned by a substantial number of students in relatively uniform ways.

In forward tracking, pathlines represent advective transport and the constraint function measures the minimum distance between a pathlinc and all extraction wells. A pathline is shown as the dashed curves and the gray area represents the contaminant plume to be contained.

In fPh3PCH Ph fCd are interwoven giving double helices and large channels containing the cations .

In fractional distillation, a liquid mixture enters the bottom of a column at a temperature at which it is volatile. The vapour then ascends the column, which is broken into sections by perforated trays. Above the perforations are bubble caps, where components of the ascending vapour can condense to a liquid, which then becomes part of a shallow layer on the tray. Some liquid flows back through the descenders to lower trays, where its constituents may be re-evaporated and rejoin the ascending vapour. The temperature of the sections decreases in an upward direction. In the warmer lower sections, components of the mixture with the highest boiling temperatures are removed from the vapour by condensation, but as the vapour ascends, components with progressively lower boiling temperatures are liquefied. Thus, on different trays of the column, different mixtures of the components can be run off. These mixtures are caWed fractions.

In frame 1, C is the lead azide crystal, P the plate and R the optical image of the crystal in the plate. Impact at 120 m sec occurs between frames 1 and 2 and causes fragmentation and jetting . Fast reaction propagates through the crystal in frames 3 and 4. Crystal thickness, 30 Mm frame interval, 0.53 Msec .

In fructose, the ring is formed from a ketone at C2 of the molecule . The structure is drawn to make the fructose glycoside comparable with maltose see



   |<      <<      >>     > |    

SEARCH



© 2024 chempedia.info