Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About
0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | a | b | c | d | e | f | g | h | i | j | k | l | m | n | o | p | q | r | s | t | u | v | w | x | y | z

   |<      <<      >>     > |    


Fabrication of HOM-DZ sensor via direct immobiiization of DZ probe into HOM monoiiths via H-bonding interaction under vacuum. Reversibiiity of the complex was achieved using 0.1 M CHsCOO as stripping agent several times, without causing leaching of the DZ probe from the HOM pore surface.

Fabrication of individual square metal monoliths into catalyst panels that are inserted into an industrial SCR unit for con-trol of NO, emissions. Similar reactors are used for oxidation of VOCs

Fabrication of molded elastomer composites with coagulated latex matrix.

Fabrication of multihollow superparamagnetic magnetite polystyiene nanocomposite particles via W OAV double emulsions. Stages 1-3 and the reaction scheme are shown. Reprinted from with permission

Fabrication of novel random fibrous chitosan scaffolds, in width

Fabrication of PANI grafted MWCN ft .

Fabrication of PANI polystyrene sulfonate-Ti02 and -Sn02 nanoparticle composites and sensitivity to CO gas.

Fabrication of periodic array of Ag nanoparticles on either flexible or rigid substrates. The gray closed circles represent the photoreduced metallic Ag nanoparticles with regular particle size and periodicity. Source

Fabrication of PLGA microparticles with an alginate shell using a microfluidic device. DCM, Dichloromethane.

Fabrication of poiymeric second-order NLO materials using a selected

Fabrication of poly polymer thin films

Fabrication of polymer membrane ISEs

Fabrication of polymer-reinforced aerogels A. and mechanism of di-isocyanate crossUnking B.

Fabrication of polymer-silica mesostructured materials through a self-assembly process by direct addition of a soluble polymer to the synthesis solution.

Fabrication of porous Pt nanoparticle membranes by the LB technique.

Fabrication of PP GO nanocomposites by in situ Ziegler—Natta polymerization. Reproduced from Huang et al. with permission from American Chemical Society.

Fabrication of pp specimens for SPM calibration. The first step chains. Subsequent filling with a hydrophilic SAM completes the matrix of the specimen 2fA

Fabrication of PPHOS-PLGA 3D biomimetic scaffolds. Optical microscopy images

Fabrication of protein nanosensor based on imprinting, coating are removed to reveal the surface imprints. Inset

Fabrication of rGO PANI microelectrodes. Reprinted with permission from Ref. . Copyright 2012, John Wiley and Sons.

Fabrication of segregated binary brushes by combination of grafting-to and grafting-from methods.

Fabrication of Si-C-0 fibers from PCS precursors

Fabrication of SiC components through Si-infiltration of C-pre-forms

Fabrication of silicon nitride microcantilevers with integrated tips, A

Fabrication of single grain boundaries. The lines indicate the CuOg planes of the aligned a-axis region on a PBCO buffer layer and the shaded areas show the c-axis region on the bare substrate. The black pattern is the photolithographic mask used for defining the four measurement lines



   |<      <<      >>     > |    

SEARCH



© 2024 chempedia.info