Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About
0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | a | b | c | d | e | f | g | h | i | j | k | l | m | n | o | p | q | r | s | t | u | v | w | x | y | z

   |<      <<      >>     > |    


Extrinsic type of fiber Fabry-Perot interferometer

Extrinsic vascular compression. Endoscopy did not demonstrate a cause for dysphagia in this patient with congestive cardiac failure and mitral regurgitation. A marshmallow swallow demonstrated hold-up of the marshmallow above an indentation of the oesophagus caused by an enlarged left atrium. The marshmallow reproduced the sensation of dysphagia

Extrinsically non-planar homeomorphic figures

Extrudate deviation and undesired oval shape of the hose die lip

Extrudate diameter as a function of shear rate. Samples 2 and 3 of

Extrudate diameter swell vs. distance from die exit. Adapted, by permission, from Chang Ho Suh, White J L, Polym. Engng. Sei., 36, No.l 1, 1996, 1521-30.

Extrudate diameter swell vs. distance from die exit. Adj ted, by permission, from Chang Ho Siih, White J L, Polym. Engng. ScL, 36, No.l 1, 1996, 1521-30.

Extrudate distortion for LLDPE at the exit of a capillary 0.5mm diameter and 20 mm long, during the second oscillating regime. The polymer flows downwards. The largest instantaneous flow rate is observed for iii . Photograph ii shows the transition from small to large instantaneous flow rate.

Extrudate distortion for PBb at the exit of a capillary 2mm diameter and 20 mm long, during the first oscillating regime.

Extrudate distortion of carbon black-fiiied SBS extruded through capillary tubes having different L D ratio at various shear rates. Black loading is constant at 10 parts .

Extrudate distortion of carbon black-filled SEBS extruded through capillary tubes having different L D ratio at various shear rates. Black loading is constant at 10 parts.

Extrudate distortion of carbon black-filled SIS extruded through capillary tubes having different L D ratio at various shear rates. Black loading is constant at 10 parts.

Extrudate distortion of PDMS LG3 at the exit of a capillary 2mm diameter and 20 mm long. Slip under stress controlled conditions. AP 26 10 Pa

Extrudate distortion of pure and black-loaded SBS with a fixed I- D ratio of 10 at various shear rates ,

Extrudate distortion of pure and black-loaded SEBS with a fixed 1. D ratio of 10 at various shear rates.

Extrudate distortion of pure and black-loaded SIS with a fixed L7D ratio of 10 at various shear rates.

Extrudate is shown flowing from the top of the die to be stretched up the tower while stringing the bubble

Extrudate micrographs 50X pineapple 1.6D

Extrudate micrographs for the three different mixing sections.

Extrudate of an LLDPE exhibiting melt fracture at an apparent shear rate of 6,655 s F Reprinted fromKahka and Denn, J. Rheol., 31, 815 .

Extrudate profiles before and after the onset of sl.p stick and melt fracture, fragmented extrudate.

Extrudate sampies as a function of screw speed for a 100

Extrudate samples as a function of screw speed fora 100

Extrudate shrinkage

Extrudate surface morphology of 50-wt wood-filled metallocene HOPE .



   |<      <<      >>     > |    

SEARCH



© 2024 chempedia.info