Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About
0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | a | b | c | d | e | f | g | h | i | j | k | l | m | n | o | p | q | r | s | t | u | v | w | x | y | z

   |<      <<      >>     > |    


Evolution of the eigenvectors of the singularity at with wave speed for quadratic autocatalysis

Evolution of the elastic and mechanical properties E, a and Kic as a function of the bulk density for sintered gels.

Evolution of the elastic and mechanical properties G and a as a function of the TMOS content for the neutral sets of alcogels and re-wetted gels.

Evolution of the elastic modulus of an as-drawn 25 pm diameter Au wire during annealing at different temperatures.

Evolution of the elastic modulus of an as-drawn 38 nm diameter Cu wire during annealing. The initial decrca.se occurred while the wire was stored during 4 months at room temperature.

Evolution of the elastic modulus of the SiAlOC ceramic component at high temperature.

Evolution of the elastic modulus, E, of the ceramic samples pyrolized at 1000 C, 1 h, with the Al Si ratio.

Evolution of the elastic recovery of the pre-ceramic samples as a function of the Al Si ratio.

Evolution of the electric conductance of nickel oxide as a function of time for different values of oxygen pressure

Evolution of the electric field distribution along the axis of a long dark discharge with growth of current density. Transition of a dark discharge into a glow discharge.

Evolution of the electrical characteristics of the solar cells as a function of the duration of the surface treatment

Evolution of the electrical resistance with time of six electrically isolated post-tensioned strands

Evolution of the electrode configurations used for LEI2. I high voltage electrode, 2 laser beam, 3 reaction zone, 4 burner head, 1 is a water-cooled cathode. The burner head, 4, is the anode in all cases

Evolution of the electrode potential .

Evolution of the electrogenerated polypyrrole weight as a function of the polymerization time, from different monomeric concentrations. From slopes obtained at lower polarization times, the pyrrole reaction order is obtained.

Evolution of the electronic properties of small free Cu clusters as a function of their size

Evolution of the electronic structure of a siloxane during rupture. Polarization of the Si-O-Si linkage occurs on stretching the molecule , and proton transfer occurs after rupture to neutralize the rupture fragments. Reprinted from E. M. Lupton, C. Nonnenberg, I. Frank, F. Achenbach, J. Weis and C. Brauchle, Chem. Phys. Lett., 2005, 414, 132-137. Copyright 2005, with permission from Elsevier.

Evolution of the electronic structure of DP4 as a function of sodium doping, as obtained by UPS. The neutral molecule is shown in the bottom and increasing doping level upwards. The energy scale is relative the vacuum level.

Evolution of the electronic structure ofDP7 as a function of sodium doping, as obtained by UPS. The spectrum for neutral DP7 is at the top, and spectra for increased doping are shown below. The energy scale is relative the vacuum level.

Evolution of the electrophoretic mobilities of suspended sediment from the Gironde and Loire estuaries . May 1983.

Evolution of the emission lineshape of a single QD. The broadening of the line at high temperature is characteristic of coupling to acoustic phonons.

Evolution of the energy levels due to interaction of

Evolution of the energy of the HOMO of TTF and LUMO of TCNQ in isolated stacks of growing size, as calculated with the BHLYP and oB97X functionals. This figure is adapted from

Evolution of the energy profile 2- BS1

Evolution of the energy state of a solid s electron in a state of isolation



   |<      <<      >>     > |    

SEARCH



© 2024 chempedia.info