Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About
0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | a | b | c | d | e | f | g | h | i | j | k | l | m | n | o | p | q | r | s | t | u | v | w | x | y | z

   |<      <<      >>     > |    


Evolution of the amount of -phase

Evolution of the amount of 3-phase as a function of the amount of calcium pimelate

Evolution of the amount of 8-phase as a function of the amount of y-quinacridone. Data adapted from Fujiyama

Evolution of the amount of J-phase as a function of the amount of y-quinacridone. Data adapted from Fujiyama

Evolution of the amount of microvoids in 0.2 mm thin 3-PP films obtained with different crystallization temperatures and deformed at temperatures ranging from 50 to 150 C up to a draw ratio of 3.8. Data taken from Chu et al.

Evolution of the amount of microvoids in 0.2 mm thin j8-PP films obtained with different crystallization temperatures and deformed at temperatures ranging from 50 to 150 C up to a draw ratio of 3.8. Data taken from Chu et al.

Evolution of the amount of olefines, formed during the butadiene hydrogenation, for different degrees of sulfuration

Evolution of the amplitude of the PTC effect and the initial conductivity of rPC CR-CNP mixtures depending on the CNP content for CR whose grain size is between 150 and 300 pm

Evolution of the amplitude-normalized PL spectra for a size-selected sample exposed to air for different cumulative times given in the figure.

Evolution of the amplitude-normalized PL spectra of a size-selected sample exposed to air for the different cumulative times given in the figure.

Evolution of the anisotropic displacement parameter of the hydrogen atom in the 3,5-dinitrobenzoic acid homodimer in its binary complex with 4-dimethylaminobenzoic add determined from neutron diffraction data. A single, well-localized position is observed at 30 K

Evolution of the annual worldwide ammonia production per year.

Evolution of the aPNA backbone design. Rationale for choice of amino acid in backbones 1 and 2

Evolution of the apparent crystal thickness distribution indicate the standard deviations of the distributions .

Evolution of the apparent diffusion coefficient Reprinted from H.-J. Grande, T. F. Otero, and 1. Cantero, Conformational relaxation in conducting polymers

Evolution of the apparent normalized release rates of various species as a function of the duration of corrosion. Although the initial rates are different from sample to sample and from element to element, the rates measured after 10 days tend to a limiting value independent of the HT material. Indeed, steady state would be reached after a longer period of corrosion.

Evolution of the apparent shear viscosity with the temperature for hot-pressed SiOC, SiZrOC and SiHfOC. .

Evolution of the apparent toughness, Kimm, and the effective toughness, Keir, for iPP EPR-1 and iPP EPR-2 tested over a wide range of test speeds at room temperature.

Evolution of the apparent toughness, Kj k, with the logarithm of the test speed, v, at room temperature for iPP EPR-1 and iPP EPR-2. The arrows indicate the test speed at which the ductile-brittle transitions occur.

Evolution of the area enthalpies of immersion into benzene, methanol and water as functions of HTT for .

Evolution of the assembly yield as a function of substrate velocity and surfactant concentration proportions are given in volume for 4.5 p.m beads trapped on an hexagonal patterned array . The surfactant mixture consists of 50 of a 10 mM aqueous solution of SDS and 50 of a 0,1 in weight aqueous solution of Triton X45.

Evolution of the atomic fractions in bimetallic nanoparticles at 300 C under oxidizing as denoted on the horizontal axis. Adapted from Ref 92.

Evolution of the ATR-FTIR spectra of an unstabilized commercial iPP, before 3 h of thermal treatment at 120 C.

Evolution of the attachment rate, the deposition rate of the attached daughters, the ventilation rate and the radon daughter concentrations A Po-218 Pb-214 Bi-214

Evolution of the average a-AbQs crystallite size during sintering of ceramics AI2O3 t-YSZ. Dotted line shows the border of the confidence range of the X-ray method.



   |<      <<      >>     > |    

SEARCH



© 2024 chempedia.info