Vanadium, Niobium and Tantalum Carbides

Carbides of Group V Vanadium, Niobium and Tantalum Carbides... 

The transition metal carbides and nitrides have often been called interstitial compounds [70] however, this is somewhat misleading. The small boron, carbon, or nitrogen atoms certainly occupy octahedral or trigonal prismatic voids of the metal sublattice, but the arrangement of the metal atoms themselves is different from that of the element. In the monocarbides the transition metal atoms show cubic close packing. However, titanium, zirconium, and hafnium are packed hexagonally and vanadium, niobium, and tantalum are body centered cubic [1]. Thus, these monocarbides are inorganic compounds with their individual crystal structures and they should not be considered as an interstitial compound of a transition metal host lattice. 

This chapter is a review of the characteristics and properties of the interstitial carbides formed by the metals of Group V vanadium, niobium, and tantalum. These three carbides have similar atomic bonding, composition, and crystallography as shown in Ch. 3. These common points can be summarized as follows ... 

The carbothermic reduction processes outlined so far apply to relatively unstable oxides of those metals which do not react with the carbon used as the reductant to form stable carbides. There are several metal oxides which are intermediate in stability. These oxides are less stable than carbon monoxide at temperatures above 1000 °C, but the metals form stable carbides. Examples are metals such as vanadium, chromium, niobium, and tantalum. Carbothermic reduction becomes complicated in such cases and was not preferred as a method of metal production earlier. However, the scenario changed when vacuum began to be used along with high temperatures for metal reduction. Carbothermic reduction under pyrovacuum conditions (high temperature and vacuum) emerged as a very useful commercial process for the production of the refractory metals, as for example, niobium and tantalum, and to a very limited extent, of vanadium. 

Special carbide tools also will often contain various percentages of titanium, tantalum, niobium icolumbium). and hafnium carbides, along witii die tungsten carbide. Chromium and vanadium carbides are also added to produce special, fine-grain-size grades of cemented tungsten carbide-cobalt materials. See Fig. 1. 

In this paper we review the results of our systematic work on the catalytic and adsorptive properties of transition metal carbides (titanium, zirconium, hafnium, vanadium, niobium, tantalum, chromium, molybdenum, tungsten, and iron). We focus our attention on the oxidation of hydrogen, carbon monoxide, ammonia, and the oxidative coupling of methane. The first two reactions are examples of complete (non-selective) oxidation, while the oxidation of ammonia simulates a selective oxidation process. The reaction of oxidative coupling of methane is being intensively explored at present as a means to produce higher hydrocarbons.5 10... 

---