Triblock copolymer matrices

Thermoplastic Elastomers. These represent a whole class of synthetic elastomers, developed siace the 1960s, that ate permanently and reversibly thermoplastic, but behave as cross-linked networks at ambient temperature. One of the first was the triblock copolymer of the polystyrene—polybutadiene—polystyrene type (SheU s Kraton) prepared by anionic polymerization with organoHthium initiator. The stmcture and morphology is shown schematically in Figure 3. The incompatibiHty of the polystyrene and polybutadiene blocks leads to a dispersion of the spherical polystyrene domains (ca 20—30 nm) in the mbbery matrix of polybutadiene. Since each polybutadiene chain is anchored at both ends to a polystyrene domain, a network results. However, at elevated temperatures where the polystyrene softens, the elastomer can be molded like any thermoplastic, yet behaves much like a vulcanized mbber on cooling (see Elastomers, synthetic-thermoplastic elastomers). 

Morphology of the anionically synthesized triblock copolymers of polyfp-methyl-styrene) and PDMS and their derivatives obtained by the selective chlorination of the hard segments were investigated by TEM 146). Samples with low PDMS content (12%) showed spherical domains of PDMS in a poly(p-methylstyrene) matrix. Samples with nearly equimolar composition showed a continuous lamellar morphology. In both cases the domain structure was very fine, indicating sharp interfaces. Domain sizes were estimated to be of the order of 50-300 A. 

The above equations gave reasonably reliable M value of SBS. Another approach to modeling the elastic behavior of SBS triblock copolymer has been developed [202]. The first one, the simple model, is obtained by a modification of classical rubber elasticity theory to account for the filler effect of the domain. The major objection was the simple application of mbber elasticity theory to block copolymers without considering the effect of the domain on the distribution function of the mbber matrix chain. In the derivation of classical equation of rabber elasticity, it is assumed that the chain has Gaussian distribution function. The use of this distribution function considers that aU spaces are accessible to a given chain. However, that is not the case of TPEs because the domain also takes up space in block copolymers. 

ABA triblock copolymers of the styrene-diene type are well known, and owe their unique properties to their heterophase morphology. This arises from the incompatibility between the polystyrene A blocks and the polydiene B blocks, leading to the formation of a dispersion of very small polystyrene domains within the polydiene matrix. This type of elastic network, held together by the polystyrene "junctions", results in thermoplastic elastomer properties. 

The term star-block copolymer is used for a star architecture in which each arm is a diblock. The influence of chain topology on mechanical and morphological properties was investigated for copolymers composed of PS and PB with a constant styrene content of = 0.74 by Michler s group (Fig. 32) [101,102], While hexagonally packed cylinders of PB in a PS matrix were observed in a symmetric PS-fo-PB-fr-PS triblock copolymer, an L phase... 

For a S63EO16C2124 triblock copolymer, a vitreous PS matrix contains minor PCL and PEO contents. It can be deduced from the crystallization behavior from the melt that both PCL and PEO crystallize at maximum su-... 

Styrene-1,3-butadiene-styrene (SBS) or styrene-isoprene-styrene (SIS) triblock copolymers are manufactured by a three-stage sequential polymerization. One possible way of the synthesis is to start with the polymerization of styrene. Since all polystyrene chains have an active anionic chain end, adding butadiene to this reaction mixture resumes polymerization, leading to the formation of a polybutadiene block. The third block is formed after the addition of styrene again. The polymer thus produced contains glassy (or crystalline) polystyrene domains dispersed in a matrix of rubbery polybutadiene.120,481,486... 

The concept of using block copolymers for preparation of nanoscopically structured material and surfaces was advanced further by introducing a third block in the chain structure [29]. One of the consequences of the multiphilicity and versatility of the ABC triblock copolymers is their tremendous richness and diversity in morphology. One of the most peculiar structures is shown in Fig. 28 where the helices of a polybutadiene microphase are wound around columns of polystyrene which are embedded in a matrix of polymethylmethacrylate. Complementary to the TEM studies of the bulk morphology (Fig. 28a,b), SFM has been used to image the surface structure of the triblock copolymer films. Figure 28c shows the wrapped PS cylinders oriented parallel to the surface, where one... 

Graft copolymers of poloxamers and either poly(acrylic acid) or chitosan change from a sol to a gel at temperature above 37 °C. The appearing gel forms a stable matrix that can retain a drag for its sustained release. The triblock copolymer consisting of polyethylene oxide)-poly(/-lactide)-poly(ethylene oxide) (PEO-PLLA-PEO) is also temperature-sensitive but shows an opposite gellation property. At low... 

---