Transient heating events production

As shown in Table 4.2, large break LOCA events involve the most physical phenomena and, therefore, require the most extensive analysis methods and tools. Typically, 3D reactor space-time kinetics physics calculation of the power transient is coupled with a system thermal hydraulics code to predict the response of the heat transport circuit, individual channel thermal-hydraulic behavior, and the transient power distribution in the fuel. Detailed analysis of fuel channel behavior is required to characterize fuel heat-up, thermochemical heat generation and hydrogen production, and possible pressure tube deformation by thermal creep strain mechanisms. Pressure tubes can deform into contact with the calandria tubes, in which case the heat transfer from the outside of the calandria tube is of interest. This analysis requires a calculation of moderator circulation and local temperatures, which are obtained from computational fluid dynamics (CFD) codes. A further level of analysis detail provides estimates of fuel sheath temperatures, fuel failures, and fission product releases. These are inputs to containment, thermal-hydraulic, and related fission product transport calculations to determine how much activity leaks outside containment. Finally, the dispersion and dilution of this material before it reaches the public is evaluated by an atmospheric dispersion/public dose calculation. The public dose is the end point of the calculation. 

---