Tower optimization stripping steam

After these moves, pressure decreased and the heater temperature was increased another 5°F. Finally, the vacuum tower bottoms stripping steam rate, heater outlet temperature, and heater pass flow were optimized to obtain maximum gas oil production. These last items usually take some trial and error. 

Crude oil fractionators are an example of a more elaborate system. They make several products as side streams and usually have some pumparound reflux in addition to top reflux which serve to optimize the diameter of the tower. Figure 3.13 is of such a tower operating under vacuum in order to keep the temperature below cracking conditions. The side streams, particularly those drawn off atmospheric towers, often are steam stripped in external towers hooked up to the main tower in order to remove lighter components. These strippers each have four or five trays, operate... 

Figure 3.13. Crude oil vacuum tower. Pumparound reflux is provided at three lower positions as well as at the top, with the object of optimizing the diameter of the tower. Cooling of the side streams is part of the heat recovery system of the entire crude oil distillation plant. The cooling water and the steam for stripping and to the vacuum ejector are on hand control.

---