Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Tongue-and-groove joints

Location Diameter (inches) Normal joint spacing (feet) Number of tongue and groove joints to be grouted... [Pg.450]

Among the preferably bonded materials there are, inter alia, wood and wood products such as hardwood and softwood, chipboards, hardboards, plywood, veneers, tongue and groove joints, dovetails and tenon and mortise. Due to their being solvent-free, dispersion adhesives are also suitable for the bonding of polystyrenes. [Pg.52]

The following general expression can be used for a typical tongue and groove joint where maximum physical properties and pressure-type joints are required ... [Pg.302]

C) Tongue-and-Groove Joint With Melt IVaps Figure 6-18. Vibration Bonding Joints ... [Pg.327]

One of the issues that can occur with a tongue and groove joint is allowing for where the adhesive will flow to when the joint is closed. In Figure 5.9, when the joint is closed, excess adhesive has nowhere to flow to and may therefore spill out and impair the aesthetics of the assembly. [Pg.80]

Figure 5.9 Tongue and groove joint (with no allowance for excess adhesive)... Figure 5.9 Tongue and groove joint (with no allowance for excess adhesive)...
Tongue-and-groove joints are self-aligning and provide a reservoir for the adhesive. Scarf butt joints keep the axis of loading in line with the joint and require no extensive machining [6]. [Pg.190]

See other pages where Tongue-and-groove joints is mentioned: [Pg.28]    [Pg.28]    [Pg.100]    [Pg.166]    [Pg.438]    [Pg.768]    [Pg.298]    [Pg.57]    [Pg.880]    [Pg.327]    [Pg.223]    [Pg.300]    [Pg.582]    [Pg.679]    [Pg.683]    [Pg.712]    [Pg.722]    [Pg.738]   
See also in sourсe #XX -- [ Pg.186 , Pg.189 , Pg.190 ]



SEARCH



Grooves

Grooving

Tongue

© 2024 chempedia.info