Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Thennal expansion coefficient

Table 6.2 Thennal expansion coefficients of perovskite oxides for SOFC cathode applications [33, 168, 184, 186]... Table 6.2 Thennal expansion coefficients of perovskite oxides for SOFC cathode applications [33, 168, 184, 186]...
Fig. 11 Global cubic thennal expansion coefficients otpoi.g.int at 372.02 K of MDPE and PVDF samples, under either CO2 or N2 during (a) sorption and (b) desorption under jumps in pressure, obtained with the thermal n differential mode. The variations in apoi-g-int in the presence of either N2 or CO2 are compared to those of samples in the presence of Hg (considered as an inert fluid)... Fig. 11 Global cubic thennal expansion coefficients otpoi.g.int at 372.02 K of MDPE and PVDF samples, under either CO2 or N2 during (a) sorption and (b) desorption under jumps in pressure, obtained with the thermal n differential mode. The variations in apoi-g-int in the presence of either N2 or CO2 are compared to those of samples in the presence of Hg (considered as an inert fluid)...
The linear dimensional change on aging is between nil and 0.2%. The thennal expansion coefficient is similar to other titanium alloys. [Pg.225]

Figures D-2 and D-3. Furthermore, the relative temperature expansions have another interesting effect. Assuming the fuel has an average expansion coefficient of aluminum (2o x 10 K ), while aluminum, stainless steel, or a molybdenum alloy cladding has average thennal expansion coefficients of 26 x, 6 x, and 5 X 10 K respectively, then as the temperature rises, the axial linear fuel density varies differently inside each of the three cladding materials. Correspondingly, the axial linear moderator density also varies in each of the three clad materials. Both of these linear density changes affect the moderator-to-fuel ratio and, hence, the degree of reactivity control that can be obtained from the moderator temperature coefficient. Figures D-2 and D-3. Furthermore, the relative temperature expansions have another interesting effect. Assuming the fuel has an average expansion coefficient of aluminum (2o x 10 K ), while aluminum, stainless steel, or a molybdenum alloy cladding has average thennal expansion coefficients of 26 x, 6 x, and 5 X 10 K respectively, then as the temperature rises, the axial linear fuel density varies differently inside each of the three cladding materials. Correspondingly, the axial linear moderator density also varies in each of the three clad materials. Both of these linear density changes affect the moderator-to-fuel ratio and, hence, the degree of reactivity control that can be obtained from the moderator temperature coefficient.
The volume elements placed at each lattice site in the face centered cubic model were assumed to be bound to each other by van der Waals forces alone. We realize that this is not an accurate representation for polymer chains and should result in theoretical estimates for thennal expansion coefficients and compressibilities... [Pg.142]

Figure 8.58 shows the effect of carbon black on thermal expansion coefficient of rubber." Increasing rubber content contributes to a decrease of thennal expansion. [Pg.447]

Electrical iesistivity(a) Magnetic pomeability Specific heat cqiacily(a) Thennal conductivity(a) Thennal coefficient of linear expansion(b)... [Pg.334]

Thennal Coefficient of Linear Expansion, Thermal Strains, and Thermal... [Pg.39]


See other pages where Thennal expansion coefficient is mentioned: [Pg.2731]    [Pg.150]    [Pg.233]    [Pg.36]    [Pg.427]    [Pg.2731]    [Pg.150]    [Pg.233]    [Pg.36]    [Pg.427]    [Pg.639]    [Pg.306]    [Pg.13]    [Pg.452]   
See also in sourсe #XX -- [ Pg.86 ]




SEARCH



Thennal

Thennal expansion

Thennal expansivity

© 2024 chempedia.info