Templated structures mesoporous materials

The second case study. This involves all silica micro- and mesoporous SBA-15 materials. SBA-15 materials are prepared using triblock copolymers as structure-directing templates. Typically, calcined SBA-15 displays pore sizes between 50 and 90 A and specific surface areas of 600-700 m g with pore volumes of 0.8-1.2cm g h Application of the Fenton concept to mesoporous materials looks simpler since mass transfer would be much less limited. However, it is not straightforward because hydrolysis can take place in the aqueous phase. 

Titanium containing hexagonal mesoporous materials were synthesized by the modified hydrothermal synthesis method. The synthesized Ti-MCM-41 has hi y ordered hexa rud structure. Ti-MCM-41 was transformed into TS-l/MCM-41 by using the dry gel conversion process. For the synthesis of Ti-MCM-41 with TS-1(TS-1/MCM-41) structure TPAOH was used as the template. The synthesized TS-l/MCM-41 has hexagonal mesopores when the DGC process was carried out for less than 3 6 h. The catalytic activity of synthesized TS-l/MCM-41 catalysts was measured by the epoxidation of 1-hexene and cyclohexene. For the comparison of the catalytic activity, TS-1 and Ti-MCM-41 samples were also applied to the epoxidation reaction under the same reaction conditions. Both the conversion of olefins and selectivity to epoxide over TS-l/MCM-41 are found hi er flian those of other catalysts. 

Sol-gel processing forms the basis for various routes employed for the fabrication of a wide diversity of functional materials. To impart a structural organization at various length scales, the syntheses are performed using templates. Most consist of a self-organized ensemble of surfactants and co-polymers [1-10]. They have been successfully applied to control the geometry and dimensions of pores that are periodically arranged as in the initial structures. Mesoporous silica materials of the MCM family, which were first synthesized by a team from the Mobil oil company [11,12], are a well-known example. 

A similar development in this direction is the synthesis of a mixed-phase material containing both micro- and mesopores (Ti-MMM-1) (223). This material was synthesized by the addition of organic templates for mesopores (cetyltrimethylammonium bromide, CTABr) and micropores (tetrapropylammo-nium bromide, TPABr) at staggered times and the variation of the temperature of a single reaction mixture. Ti-MMM-1 is more selective (for oxidation of cyclohexane and of n-octane) than either Ti-MCM-41 or TS-1. The powder X-ray diffraction pattern indicates that the material contains both MCM-41 and MFI structures. The mixed phase contains framework Ti species and more atomic order within its walls than Ti-doped MCM-41. 

Figure 15.1 Ordered nanoscale structures of mesoporous materials such as FSM-16 and HMM-1 (Et-HMM-1) as the silica and organosilica templates for surface-mediated synthesis of metal/alloy nanowires and nanoparticles.

Preparation of MCM-41 materials [1] usually includes a high temperature calcination step that in fact opens mesopores by removing structure directing molecules (template) as well as results in the structure shrinkage due to high temperature condensation of silanol groups [2], Functionalization of mesoporous materials with organosilanes is often employed to synthesize materials of desired surface properties for advanced adsorption and catalytic applications [3] as well as to improve their stability [4]. 

Since the first synthesis of mesoporous M41S alumosilicates in 1992 [1,2] numerous systems of mesoporous materials have been reported. The principle method of these syntheses consists of the utilisation of lyotropic liquid crystals as supramolecular templates, which act as structure directing agents in order to mesostructure inorganic building units. 

Structures originated by molecular self-assembly are usually larger (on the order of several nanometers, yielding mesoporous materials, Figure 3.4) than those obtained from organic templates (typically microporous, pore size <2nm) [5], The large size of the mesopore (2-50 nm) facilitates the access of reactants to the interior of the solid. This allows for processing of bulky molecules that cannot access the narrower porosity of microporous materials, like zeolites. Control of the synthesis... 

---