Temperature-time-regimes

Perez-Galvez, A., Homero-Mendez, D., and Mmguez-Mosquera, M.I., Dependence of carotenoid content and temperature-time regimes during the traditional slow drying of red pepper for paprika production at La Vera County, Eur. Food Res. Technol., 221, 645, 2005. 

Using ammonia-complexed metal iodides and thiourea at pH 10, films were formed whose properties depended on the temperature-time regime of the depo-... 

Figure 9.3 Typical temperature-time regime for a two-stage polymerization process...

For this pmpose we may use an assessment criterion of the viscous-plastic state in any temperature-time regime of the polymer hardening reaction, as given by the following relationship [23] ... 

Equation (7) for the accepted assumptions concerning the character of distribution of the material temperature is accurately fulfflled whenever the total time that the material is present in the injection cylinder (plastification time) and in the mold corresponds to the time of the viscous-plastic state of the material in any given temperature-time regime, i.e. when... 

The relationships obtained (7-9) linking up the temperatures and the time that the material is present in the various zones of the plastification and molding systems constitute a basis for a further optimization of the temperature-time regimes of pressure casting of reactoplasts, including granulated cast aminoplasts. 

The response of different precursor fibers to different temperature/time regimes shows dramatic variations. Fig. 16 shows the profiles discussed in this Section. Profile A corresponds to the standard stabilization conditions , cf. Fig. 14. 

Synthesis in diluted solutions is also possible as well [173], while the presence of F hardly shows any effect [174]. Crystallization occurs in the temperature-time regime of zeolites, viz. around 150 °C. Using the following molar composition... 

Fig. 9.8. Comparison of the temperature-time regimes for the thermal treatment of various photostructurable glasses [366]...

---