Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Sulphur ignition system

A sulphur ignition system is used in the Ballestra design of sulphur burner. The following safeguards must be incorporated ... [Pg.217]

Start circulation of alkali solution in scrubbers. Sulphur feeding to be started only when converter passes have been heated up to their ignition temperatures by suitable means (oil firing or other means). Start with low air and sulphur feed rates only. Bypass the waste heat recovery boilers partially in the first few hours tiU all the system temperatures have been normalised. Gradually increase the air flow and sulphur feeding to increase the production rate. Operate the oleum and SO3 systems to produce them as per demanded by customers/as advised by marketing department. [Pg.128]

The exothermal reaction of fuel-rich mixtures from Li and PTFE has been proposed as payload for one-shot heating [17]. The device comprises a thin-walled steel tube containing a Hthium tube with a core filling of coarse and an electrical igniter. To reduce the ignition time, the system may be pressurized with either sulphur... [Pg.240]

See other pages where Sulphur ignition system is mentioned: [Pg.177]    [Pg.311]    [Pg.348]    [Pg.64]    [Pg.635]    [Pg.638]    [Pg.142]    [Pg.109]    [Pg.1460]    [Pg.298]    [Pg.267]    [Pg.15]    [Pg.15]    [Pg.516]   
See also in sourсe #XX -- [ Pg.217 ]



SEARCH



Igniter system

Ignition system

Sulphur igniter

Sulphur ignition

Sulphur system

© 2024 chempedia.info